aif-ng/examples/aif.xml

<?xml version="1.0" encoding="UTF-8" ?>
<aif xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xmlns="https://aif-ng.io/"
     xsi:schemaLocation="https://aif-ng.io/ https://schema.xml.r00t2.io/projects/aif.xsd"
     chrootPath="/mnt/aif"
     reboot="false">
    <bootstrap>
        <tarball>https://arch.mirror.square-r00t.net/iso/latest/archlinux-bootstrap-2019.12.01-x86_64.tar.gz</tarball>
        <verify>
            <gpg>
                <signatureFile>
                    https://arch.mirror.square-r00t.net/iso/latest/archlinux-bootstrap-2019.12.01-x86_64.tar.gz.sig
                </signatureFile>
            </gpg>
            <hash>
                <checksumFile hashType="md5">http://arch.mirror.square-r00t.net/iso/latest/md5sums.txt</checksumFile>
                <checksumFile hashType="sha1">http://arch.mirror.square-r00t.net/iso/latest/sha1sums.txt</checksumFile>
            </hash>
        </verify>
    </bootstrap>
    <storage>
        <blockDevices>
            <disk id="sda" device="/dev/sda" diskFormat="gpt">
                <!-- Partitions are numbered *in the order they are specified*. -->
                <!-- e.g. "boot" would be /dev/sda1, "secrets1" would be /dev/sda2, etc. -->
                <part id="boot" name="BOOT" label="/boot" start="0%" stop="10%" fsType="fat32">
                    <partitionFlag>esp</partitionFlag>
                </part>
                <part id="secrets1" name="crypted" label="shh" start="10%" stop="20%" fsType="ext4">
                    <partitionFlag>root</partitionFlag>
                </part>
                <part id="lvm_member1" name="jbod" label="dynamic" start="20%" stop="30%" fsType="ext4">
                    <partitionFlag>lvm</partitionFlag>
                </part>
                <part id="raid1_d1" start="30%" stop="55%" fsType="ext4">
                    <partitionFlag>raid</partitionFlag>
                </part>
                <part id="raid1_d2" start="55%" stop="80%" fsType="ext4">
                    <partitionFlag>raid</partitionFlag>
                </part>
                <part id="swapdisk" start="80%" stop="90%" fsType="linux-swap(v1)">
                    <partitionFlag>swap</partitionFlag>
                </part>
                <!-- You can also create a partition with no flags (and not use). -->
                <part id="grow" start="90%" stop="100%" fsType="ext4"/>
            </disk>
        </blockDevices>
        <!-- "Special" devices are processed *in the order they are specified*. This is important if you wish to
             e.g. layer LVM on top of LUKS - you would specify <lvm> before <luks> and reference the
             <luksDev id="SOMETHING" ... > as <pv source="SOMETHING" ... />.
             Of course, a limitation of this is you cannot e.g. first assemble a LUKS volume, then an LVM
             group, and then another LUKS volume - so plan accordingly and/or perform that in
             a <post> script instead. -->
        <luks>
            <luksDev id="luks_secrets" name="secrets" source="secrets1">
                <!-- You can assign multiple secrets (or "keys") to a LUKS volume. -->
                <secrets>
                    <!-- A simple passphrase. -->
                    <passphrase>secrets1</passphrase>
                </secrets>
                <secrets>
                    <!-- A key that uses a keyfile on a mounted path. This example uses the passphrase in
                         a plaintext file, which is in turn read by LUKS. -->
                    <passphrase>secrets1</passphrase>
                    <keyFile>/boot/.decrypt.plaintext</keyFile>
                </secrets>
                <secrets>
                    <!-- This will generate a 4096-byte file of random data. -->
                    <keyFile size="4096">/root/.decrypt.key</keyFile>
                </secrets>
            </luksDev>
        </luks>
        <lvm>
            <volumeGroup id="vg1" name="group1" extentSize="4MiB">
                <physicalVolumes>
                    <pv id="pv1" source="lvm_member1"/>
                </physicalVolumes>
                <logicalVolumes>
                    <!-- Default is to add all available PVs in PhysicalVolumes... -->
                    <lv id="lv1" name="logical1" size="80%"/>
                    <lv id="lv2" name="logical2" size="512MiB">
                        <!-- But you can also explicitly designate them. They have to still be in the same volumeGroup.
                             This is generally speaking a *terrible* idea, though, because it makes getting the
                             sizes right virtually *impossible*. If you do this, you should consistently ONLY use
                             bytes for each LV size and know the size of the PVs/VGs ahead of time. -->
                        <pvMember source="pv1"/>
                    </lv>
                </logicalVolumes>
            </volumeGroup>
        </lvm>
        <mdadm>
            <!-- level can be 0, 1, 4, 5, 6, or 10. RAID 1+0 (which is different from mdadm RAID10) would be done by
                 creating an array with members of a previously assembled array. -->
            <array id="mdadm1" name="data" meta="1.2" level="1">
                <member source="raid1_d1"/>
                <member source="raid1_d2"/>
            </array>
        </mdadm>
        <fileSystems>
            <fs id="esp" source="boot" type="vfat">
                <!-- Supports mkfs arguments. Leave off the filesystem type and device name, obviously;
                     those are handled by the above attributes. -->
                <opt name="-F">32</opt>
                <opt name="-n">ESP</opt>
            </fs>
            <fs id="luks" source="luks_secrets" type="ext4">
                <opt name="-L">seekrit</opt>
            </fs>
            <fs id="swap" source="swap" type="swap"/>
            <fs id="vg1-lv1" source="lv1" type="ext4"/>
            <fs id="mdraid" source="mdadm1" type="ext4"/>
        </fileSystems>
        <mountPoints>
            <!-- And you use the id to reference mountpoints as well. Important to note, we mount *filesystems*,
                 not partitions/disks/etc. -->
            <!-- Note that targets should be *outside* of the chroot!
                 e.g. /aif/storage/mountPoints[@target="/mnt/aif/boot"]
                      and
                      /aif/system[@chrootPath="/mnt/aif"]
                      would lead to the filesystem being accessible *inside* the chroot (and thus the completed install)
                      at /boot. -->
            <mount source="luks" target="/mnt/aif">
                <opt name="rw"/>
                <opt name="relatime"/>
                <opt name="compress">lzo</opt>
                <opt name="ssd"/>
                <opt name="space_cache"/>
                <opt name="subvolid">5</opt>
                <opt name="subvol">/</opt>
            </mount>
            <mount source="esp" target="/mnt/aif/boot"/>
            <mount source="swap" target="swap"/>
            <mount source="vg1-lv1" target="/mnt/aif/mnt/pool"/>
            <mount source="mdraid" target="/mnt/aif/mnt/raid"/>
        </mountPoints>
    </storage>
    <network hostname="aiftest.square-r00t.net" provider="netctl">
        <ethernet id="lan" device="auto" defroute="true" searchDomain="domain.tld">
            <addresses>
                <ipv4 auto="true">
                    <address gateway="192.168.1.1">192.168.1.5/24</address>
                </ipv4>
                <ipv6 auto="slaac">
                    <address>fde4:16b9:654b:bbfa::15/64</address>
                </ipv6>
            </addresses>
            <routes>
                <ipv4 auto="true">
                    <route gateway="192.168.1.1">10.1.1.0/24</route>
                    <route gateway="10.1.1.4">172.16.1.20/32</route>
                </ipv4>
                <ipv6 auto="true"/>
            </routes>
            <resolvers>
                <ipv4 auto="false"/>
                <ipv6 auto="false"/>
                <resolver>64.6.64.6</resolver>
                <resolver>4.2.2.1</resolver>
                <resolver>8.8.8.8</resolver>
            </resolvers>
        </ethernet>
        <wireless id="wlan" device="wlp2s0" essid="MyWirelessLan"
                  bssid="00-00-5E-00-53-00" defroute="false" searchDomain="wifi.lan">
            <addresses>
                <ipv4 auto="true"/>
            </addresses>
            <routes>
                <ipv6 auto="true"/>
            </routes>
            <encryption>
                <type>wpa2</type>
                <creds>
                    <psk isKey="false">ABadWiFiPassword</psk>
                    <!-- Or the key itself. See the manual for ways to generate this. -->
                    <!-- <psk isKey="true">ca8981cbe55374c7408af0174604588111b4611832969f87fc5604fe4c36365c</psk> -->
                </creds>
            </encryption>
        </wireless>
    </network>
    <system timezone="EST5EDT">
        <rootPassword>
            <passwordPlain>1ns3cur3p4ssw0rd</passwordPlain>
        </rootPassword>
        <locales>
            <locale name="LANG">en_US.UTF-8</locale>
        </locales>
        <console>
            <text>
                <font>default8x16</font>
            </text>
            <keyboard>
                <map>us</map>
            </keyboard>
        </console>
        <!-- Note: The password hash below is "test"; don't waste your time trying to crack. :) -->
        <users>
            <user name="aifusr"
                  home="/opt/aifusr"
                  sudo="true"
                  comment="A test user for AIF.">
                <password>
                    <passwordHash hashType="(detect)">
                        $6$WtxZKOyaahvvWQRG$TUys60kQhF0ffBdnDSJVTA.PovwCOajjMz8HEHL2H0ZMi0bFpDTQvKA7BqzM3nA.ZMAUxNjpJP1dG/eA78Zgw0
                    </passwordHash>
                </password>
                <xGroup name="admins" create="true"/>
                <xGroup name="wheel"/>
                <xGroup name="users"/>
            </user>
        </users>
        <services>
            <service status="true">sshd</service>
        </services>
    </system>
    <pacman>
        <repos>
            <repo name="core" enabled="true" sigLevel="default" mirror="file:///etc/pacman.d/mirrorlist"/>
            <repo name="extra" enabled="true" sigLevel="default" mirror="file:///etc/pacman.d/mirrorlist"/>
            <repo name="community" enabled="true" sigLevel="default" mirror="file:///etc/pacman.d/mirrorlist"/>
            <repo name="multilib" enabled="true" sigLevel="default" mirror="file:///etc/pacman.d/mirrorlist"/>
            <repo name="testing" enabled="false" sigLevel="default" mirror="file:///etc/pacman.d/mirrorlist"/>
            <repo name="multilib-testing" enabled="false" sigLevel="default" mirror="file:///etc/pacman.d/mirrorlist"/>
            <repo name="archlinuxfr" enabled="false" sigLevel="Optional TrustedOnly"
                  mirror="http://repo.archlinux.fr/$arch"/>
        </repos>
        <mirrorList>
            <mirror>http://arch.mirror.square-r00t.net/$repo/os/$arch</mirror>
            <mirror>http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch</mirror>
            <mirror>http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch</mirror>
            <mirror>http://arch.mirrors.ionfish.org/$repo/os/$arch</mirror>
            <mirror>http://mirrors.gigenet.com/archlinux/$repo/os/$arch</mirror>
            <mirror>http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch</mirror>
        </mirrorList>
        <software>
            <package repo="core">sed</package>
            <package>python</package>
            <package>perl</package>
            <package>openssh</package>
        </software>
    </pacman>
    <bootloader type="grub" target="/boot" efi="true"/>
    <scripts>
        <pre>
            <script>https://aif.square-r00t.net/sample-scripts/pre/first.sh</script>
            <script>https://aif.square-r00t.net/sample-scripts/pre/second.pl</script>
        </pre>
        <post>
            <script>https://aif.square-r00t.net/sample-scripts/post/first.sh</script>
            <script>https://aif.square-r00t.net/sample-scripts/post/second.py</script>
        </post>
    </scripts>
</aif>