WHEW. booting now all fixed for all implementations. can probably get that iPXE image smaller, though.

bdisk/build.py

@@ -136,14 +136,20 @@ def genUEFI(build, bdisk):
                 fname = 'bootx64.efi'
             else:
                 fname = f
-            if not os.path.isfile(prepdir + '/EFI/boot/' + fname):
+            with open('{0}/root.x86_64/usr/share/efitools/efi/{1}'.format(
-                shutil.copy2('{0}/root.x86_64/usr/share/efitools/efi/{1}'.format(chrootdir, f),
+                                                            chrootdir,
-                            '{0}/EFI/boot/{1}'.format(prepdir, fname))
+                                                            f),
+                                                            'rb') as r:
+                with open('{0}/EFI/boot/{1}'.format(prepdir, fname), 'wb') as file:
+                    file.write(r.read())
         # And we also need the systemd efi bootloader.
         if os.path.isfile(prepdir + '/EFI/boot/loader.efi'):
             os.remove(prepdir + '/EFI/boot/loader.efi')
-        shutil.copy2(chrootdir + '/root.x86_64/usr/lib/systemd/boot/efi/systemd-bootx64.efi',
+        with open('{0}/root.x86_64/usr/lib/systemd/boot/efi/systemd-bootx64.efi'.format(
-                    prepdir + '/EFI/boot/loader.efi')
+                                                            chrootdir),
+                                                            'rb') as r:
+            with open('{0}/EFI/boot/loader.efi'.format(prepdir), 'wb') as file:
+                file.write(r.read())
         # And the accompanying configs for the systemd efi bootloader, too.
         tpl_loader = jinja2.FileSystemLoader(templates_dir)
         env = jinja2.Environment(loader = tpl_loader)
@@ -166,9 +172,9 @@ def genUEFI(build, bdisk):
                 f.write(tpl_out)
         # And we need to get filesizes (in bytes) for everything we need to include in the ESP.
         # This is more important than it looks.
-        #sizetotal = 33553920  # The spec'd EFI binary size (32MB). It's okay to go over this though (and we do)
+        sizetotal = 33553920  # The spec'd EFI binary size (32MB). It's okay to go over this though (and we do)
         # because xorriso sees it as a filesystem image and adjusts the ISO automagically.
-        sizetotal = 2097152  # we start with 2MB and add to it for wiggle room
+        #sizetotal = 2097152  # we start with 2MB and add to it for wiggle room
         sizefiles = ['/boot/' + bdisk['uxname'] + '.64.img',
                     '/boot/' + bdisk['uxname'] + '.64.kern',
                     '/EFI/boot/bootx64.efi',
@@ -235,10 +241,8 @@ def genUEFI(build, bdisk):
                 if os.path.isfile(z):
                     os.remove(z)
                 shutil.copy(y, z)
-        #shutil.copy2('{0}/root.{1}/boot/vmlinuz-linux-{2}'.format(chrootdir, 'x86_64', bdisk['name']),
         shutil.copy2('{0}/root.{1}/boot/vmlinuz-linux'.format(chrootdir, 'x86_64'),
                     '{0}/EFI/{1}/{2}.efi'.format(mountpt, bdisk['name'], bdisk['uxname']))
-        #shutil.copy2('{0}/root.{1}/boot/initramfs-linux-{2}.img'.format(chrootdir, 'x86_64', bdisk['name']),
         shutil.copy2('{0}/root.{1}/boot/initramfs-linux.img'.format(chrootdir, 'x86_64'),
                     '{0}/EFI/{1}/{2}.img'.format(mountpt, bdisk['name'], bdisk['uxname']))
         # TODO: support both arch's as EFI bootable instead? Maybe? requires more research. very rare.

bdisk/ipxe.py

@@ -133,8 +133,8 @@ def genISO(conf):
         os.makedirs(os.path.dirname(efiboot_img), exist_ok = True)  # FAT32 embedded EFI dir
         os.makedirs('{0}/EFI/boot'.format(bootdir), exist_ok = True)  # EFI bootloader binary dir
         # Inner dir (miniboot.img file)
-        sizetotal = 2097152  # 2MB wiggle room. increase this if we add IA64.
+        #sizetotal = 2097152  # 2MB wiggle room. increase this if we add IA64.
-        #sizetotal = 34603008  # 33MB wiggle room. increase this if we add IA64.
+        sizetotal = 34603008  # 33MB wiggle room. increase this if we add IA64.
         sizetotal += os.path.getsize(innerefi64)
         sizefiles = ['HashTool', 'PreLoader']
         for f in sizefiles:
@@ -161,7 +161,7 @@ def genISO(conf):
         cmd = ['/bin/mount', efiboot_img, mountpt]
         subprocess.call(cmd)
         os.makedirs(mountpt + '/EFI/boot', exist_ok = True)  # "Inner" (EFI image)
-        os.makedirs('{0}/EFI/{1}'.format(mountpt, bdisk['name']), exist_ok = True)  # "Inner" (EFI image)
+        #os.makedirs('{0}/EFI/{1}'.format(mountpt, bdisk['name']), exist_ok = True)  # "Inner" (EFI image)
         os.makedirs('{0}/boot'.format(bootdir), exist_ok = True)  # kernel(s)
         os.makedirs('{0}/loader/entries'.format(bootdir), exist_ok = True)  # EFI
         for d in (mountpt, bootdir):
@@ -171,19 +171,24 @@ def genISO(conf):
                 fname = 'bootx64.efi'
             else:
                 fname = f
-            if not os.path.isfile('{0}/EFI/boot/{1}'.format(mountpt, fname)):
+
-                shutil.copy2('{0}/root.x86_64/usr/share/efitools/efi/{1}'.format(chrootdir, f),
+            with open('{0}/root.x86_64/usr/share/efitools/efi/{1}'.format(
-                    '{0}/EFI/boot/{1}'.format(mountpt, fname))
+                                                                chrootdir,f),
-                if not os.path.isfile('{0}/EFI/boot/{1}'.format(bootdir, f)):
+                                                                'rb') as r:
-                    shutil.copy2('{0}/root.x86_64/usr/share/efitools/efi/{1}'.format(chrootdir, f),
+                with open('{0}/EFI/boot/{1}'.format(mountpt, fname), 'wb') as file:
-                        '{0}/EFI/boot/{1}'.format(bootdir, fname))
+                    file.write(r.read())
-                # And the systemd efi bootloader.
+            with open('{0}/root.x86_64/usr/share/efitools/efi/{1}'.format(
-                if not os.path.isfile('{0}/EFI/boot/loader.efi'.format(mountpt)):
+                                                                chrootdir, f),
-                    shutil.copy2('{0}/root.x86_64/usr/lib/systemd/boot/efi/systemd-bootx64.efi'.format(chrootdir),
+                                                                'rb') as r:
-                                    '{0}/EFI/boot/loader.efi'.format(mountpt))
+                with open('{0}/EFI/boot/{1}'.format(bootdir, fname), 'wb+') as file:
-                    if not os.path.isfile('{0}/EFI/boot/loader.efi'.format(bootdir)):
+                    file.write(r.read())
-                        shutil.copy2('{0}/root.x86_64/usr/lib/systemd/boot/efi/systemd-bootx64.efi'.format(chrootdir),
+        # And the systemd efi bootloader.
-                                        '{0}/EFI/boot/loader.efi'.format(bootdir))
+        with open('{0}/root.x86_64/usr/lib/systemd/boot/efi/systemd-bootx64.efi'.format(
+                                                                chrootdir),
+                                                                'rb') as r:
+            with open('{0}/EFI/boot/loader.efi'.format(mountpt), 'wb+') as f:
+                f.write(r.read())
+
         # And loader entries.
         os.makedirs('{0}/loader/entries'.format(mountpt, exist_ok = True))
         for t in ('loader', 'base'):
@@ -202,7 +207,7 @@ def genISO(conf):
         # Outer dir
         outerdir = True
         os.makedirs('{0}/isolinux'.format(bootdir), exist_ok = True)  # BIOS
-        # and we create the loader entries (outer)
+        # Loader entries (outer)
         for t in ('loader','base'):
             if t == 'base':
                 name = bdisk['uxname']

docs/manual/USER.adoc

@@ -21,4 +21,5 @@ include::user/GETTING_STARTED.adoc[]
 include::user/IMPORTANT_CONCEPTS.adoc[]
 include::user/PROJECT_LAYOUT.adoc[]
 include::user/BUILDINI.adoc[]
+include::user/ADVANCED.adoc[]
 

docs/manual/user/ADVANCED.adoc

@@ -0,0 +1,2 @@
+== Advanced Customization
+If the <<_the_code_build_ini_code_file,`build.ini` file>> doesn't provide enough customization to your liking, I don't blame you! It was designed only to provide the most basic control and is primarily only used to control the build process itself.

docs/manual/user/BUILDINI.adoc

@@ -1,4 +1,4 @@
-== The `build.ini` file
+== The `build.ini` File
 This file is where you can specify some of the very basics of BDisk building. It allows you to specify/define certain variables and settings used by the build process. It uses https://docs.python.org/3/library/configparser.html[ConfigParser^] for the parsing engine, and you can do some https://wiki.python.org/moin/ConfigParserExamples[more advanced^] things with it than I demonstrate in the default.
 
 It's single-level, but divided into "sections". This is unfortunately a limitation of ConfigParser, but it should be easy enough to follow.
@@ -510,4 +510,75 @@ Directory to hold SSL results, if we are generating keys, certificates, etc.
 ==== `ssl_ca`
 Path to the (root) CA certificate file iPXE should use. See http://ipxe.org/crypto[iPXE's crypto page^] for more information.
 
-NOTE: You can use your own CA to sign existing certs.
+NOTE: You can use your own CA to sign existing certs. This is handy if you run a third-party/"Trusted" root-CA-signed certificate for the HTTPS target.
+
+. No whitespace
+. Must be in PEM/X509 format
+. *Required* if <<__code_iso_code,`iso`>> is enabled
+. If it exists, a matching key (ssl_cakey) *must* be specified
+.. However, if left blank/doesn't exist, one will be automatically generated
+
+==== `ssl_cakey`
+Path to the (root) CA key file iPXE should use.
+
+. No whitespace
+. Must be in PEM/X509 format
+. *Required* if <<__code_iso_code,`iso`>> is enabled
+. If left blank or it doesn't exist (and <<__code_ssl_ca_code,`ssl_ca`>> is also blank), one will be automatically generated
+. *Must* match/pair to <<__code_ssl_ca_code,`ssl_ca`>> if specified/exists
+. MUST NOT be passphrase-protected/DES-encrypted
+
+==== `ssl_crt`
+Path to the _client_ certificate iPXE should use.
+
+. No whitespace
+. Must be in PEM/X509 format
+. *Required* if <<__code_iso_code,`iso`>> is enabled
+. If specified/existent, a matching CA cert (<<__code_ssl_ca_code,`ssl_ca`>>) and key (<<__code_ssl_cakey_code,`ssl_cakey`>>) *must* be specified
+.. However, if left blank/doesn't exist, one will be automatically generated
+. *Must* be signed by <<__code_ssl_ca_code,`ssl_ca`>>/<<__code_ssl_cakey_code,`ssl_cakey`>> if specified and already exists
+
+==== `ssl_key`
+Path to the _client_ key iPXE should use.
+
+. No whitespace
+. Must be in PEM/X509 format
+. *Required* if <<__code_iso_code,`iso`>> is enabled
+. If left blank/nonexistent (and <<__code_ssl_ca_code,`ssl_ca`>> is also blank), one will be automatically generated
+
+=== `[rsync]`
+This section controls aspects of rsync pushing. Only used if <<__code_rsync_code,`sync:rsync`>> is enabled.
+
+==== `host`
+The rsync destination host.
+
+. Must resolve from the build server
+. Can be host, FQDN, or IP address
+
+==== `user`
+This is the remote user we should use when performing the rsync push.
+
+. User must exist on remote system
+. SSH pubkey authorization must be configured
+. The destination's hostkey must be added to your local build user's known hosts
+
+==== `path`
+This is the remote destination path we should use for pushing via rsync.
+
+
+NOTE: You'll probably want to set *`http:user`* and *`group`* to what it'll need to be on the destination.
+
+. No whitespace
+. The path *must* exist on the remote host
+. The path MUST be writable by <<__code_user_code_5,`user`>>
+
+==== `iso`
+Should we rsync over the ISO files too, or just the boot files?
+
+[options="header"]
+|======================
+2+^|Accepts (case-insensitive) one of:
+^m|yes ^m|no
+^m|true ^m|false
+^m|1 ^m|0
+|======================

extra/dist.build.ini

@@ -5,515 +5,82 @@
 # This file is used to define various variables/settings
 # used by the build script.
 #
-# It is well-commented, and uses INI syntax.
+# For full (perhaps overly-verbose ;) documentation, please
-# See https://wiki.python.org/moin/ConfigParserExamples
+# see:
-# for some advanced features if you would like to use
+# https://bdisk.square-r00t.net/#_the_code_build_ini_code_file
-# them.
+# Or simply refer to the section titled "The build.ini File"
-# Blank lines are ignored. Section integrity is important.
+# in the user manual.
-# #- and ;-prefixed lines are comments and are not parsed.
-# If restrictions on input are present, they will be
-# given in a numerical list.
 
-#---------------------------------------------------------#
-# This section controls some aspects about the live
-#	environment itself.
-#---------------------------------------------------------#
 [bdisk]
-
-; The name of the project. If you roll your own and don't
-;	want it called the default, here's where you change it.
-; 0.) Alphanumeric only
-; 1.) 8 characters total or less
-; 2.) No whitespace
-; 3.) ASCII *only*
-; 4.) Will be converted to uppercase if it isn't already
 name = BDISK
-
-; This is used for filenames, etc.
-; I highly recommend it be the same as 'name', but
-;	lowercase.
-; 0.) Alphanumeric only
-; 1.) No whitespace
-; 2.) ASCII *only*
-; 3.) Will be converted to lowercase if it isn't already
 uxname = bdisk
-
-; This string is used for "pretty-printing" of the name.
-; 0.) Can contain whitespace
-; 1.) Can be mixed-case, uppercase, or lowercase
-; 2.) ASCII *only*
 pname = BDisk
-
-; What version is this?
-; If we don't have a version specified here, we'll
-; try to guess based on the current git commit in build:basedir.
-; 0.) No whitespace
 ver = 
-
-; Your/your organization's name.
-; The same rules as 'pname' apply:
-; 0.) Can contain whitespace
-; 1.) Can be mixed-case, uppercase, or lowercase
-; 2.) ASCII *only*
 dev = r00t^2
-
-; Your email address.
-; This is only used for commit messages (sync:git),
-; or GPG-signing the releases (see the associated build
-; section items).
 email = bts@square-r00t.net
-
-; What this distribution/project is used for.
-; 0.) Can contain whitespace
-; 1.) Can be mixed-case, uppercase, or lowercase
-; 2.) ASCII *only*
 desc = j00 got 0wnz0r3d lulz.
-
-; What is your livedistro's URL?
-; 0.) Should be a valid URI understood by minimal versions
-;	of curl.
 uri = https://bdisk.square-r00t.net
-
-; Should the root user have a password? IF THIS IS NOT SET,
-; PASSWORD LOGIN WILL BE DISABLED! If you wish to have a
-; blank password, use the string:
-;	BLANK
-; Do NOT use a plaintext password here. You will need to
-; generate a salted and hashed string in a shadow-compatible
-; format. If you need help generating one, see docs/HOWTO.hashgen.
-; If an assistance script is available, the path will be given
-;	(i.e. extras/bin/hashgen.py).
-;
-; Note that if you want an automatic login, this is NOT where it
-; would be set. It should instead be controlled via:
-;	overlay/etc/systemd/system/getty@ttyN.service.d/autologin.conf
-; In the following format:
-;	[Service]
-;	Type=idle
-;	ExecStart=
-;	ExecStart=-/usr/bin/agetty --autologin <USERNAME> --noclear %I 38400 linux
-;(where N is the TTY number). Alternatively, if booting to a GUI, it
-; can be set as according to that GUI (e.g. for LXDE,
-; 	overlay/etc/lxdm/lxdm.conf, "autologin=<USERNAME>")
-; 0.) MUST be a salted SHA512 string in shadow format
-; 1.) ALL $'s (there should be three of them) MUST be escaped with a second $.
-;	e.g.:  $6$aBcDeFgHiJ$ZxYw.... would become $$6$$aBcDeFgHiJ$$ZxYw...
 root_password =
-
-; Should we create a non-root user on the image?
-; Note that this user has full sudo access.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 user = yes
 
-
-#---------------------------------------------------------#
-# This section controls aspects about bdisk:user.
-# Only used if bdisk:user set to True/yes/etc.
-#---------------------------------------------------------#
 [user]
-
-; What username should we use for the live system?
-; Standard *nix username rules apply:
-;	0.) ASCII only
-;	1.) 32 characters or less
-;	2.) Alphanumeric only
-;	3.) Lowercase only
-;	4.) No whitespace
-;	5.) Cannot start with a number
 username = ${bdisk:uxname}
-
-; What comment/description should be used for the user?
-; See passwd(5) if you need details on this.
-; 0.) ASCII only
 name = Default user
-
-; What password should be set for the user, if any?
-; See bdisk:root_password for how to generate this.
-; DO NOT PUT A PLAINTEXT PASSWORD HERE.
 password =
 
-#---------------------------------------------------------#
-# This section controls some aspects about the host
-#	and things like filesystem paths, etc.
-#---------------------------------------------------------#
 [build]
-
-; What is the mirror for your bootstrap tarball?
-; It is *highly* recommended you use an Arch Linux tarball
-; as the build process is highly specialized to this.
-; 0.) No whitespace
-; 1.) Must be accessible remotely (no local file paths)
 mirror = mirror.us.leaseweb.net
-
-; What is the protocol for the bootstrap mirror?
-; 0.) Must be one of:
-; 	http, https, ftp
 mirrorproto = https
-
-; What is the path to the tarball directory?
-; 0.) Must be a complete path
-; 	(e.g. /dir1/subdir1/subdir2/
-; 1.) No whitespace
 mirrorpath = /archlinux/iso/latest/
-
-; What is the filename for the tarball found in the above?
-; If left blank, we will use the sha1 checksum file to try
-; to guess the most recent file.
 mirrorfile = 
-
-; What is the path to a sha1 checksum file?
-; 0.) No whitespace
-; 1.) Must be the full path
-; 2.) Don't include the mirror domain or protocol
 mirrorchksum = ${mirrorpath}sha1sums.txt
-
-; Optional GPG checking.
-; If the file has a GPG signature file,
-; we can use it for extra checking.
-; If it's blank, GPG checking will be disabled.
-; If you specify just '.sig' (or use the default
-; and don't actually specify a mirrorfile),
-; we'll try to guess based on the file from the sha1
-; checksums. Note that this must evaluate to a full
-; URL (e.g.:
-;	${mirrorproto}://${mirror}${mirrorpath}somefile.sig)
-; 0.) No whitespace (if specified)
-; 1.) Must be the full path
 mirrorgpgsig =
-
-; What is a valid key ID that should be used to
-; verify the tarballs?
-; 0.) Only used if mirrorgpgsig is set
-; 1.) Should be in the "shortform"
-;	(e.g. 7F2D434B9741E8AC)
 gpgkey = 7F2D434B9741E8AC
-
-; What is a valid keyserver we should use
-; to fetch gpgkey?
-; 0.) Only used if mirrorgpgsig is set
-; 1.) The default (blank) is probably fine.
-;     If you don't specify a personal GPG config
-;     (under the gpg section), then you'll definitely probably
-;     want to leave this blank.
-; 2.) If set, make sure you use a valid URI (e.g.:
-;     hkp://pgp.mit.edu )
 gpgkeyserver =
-
-; Should we sign our release files? (See the GPG section)
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
 gpg = no
-
-; Where should we save the bootstrap tarballs?
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 dlpath = /var/tmp/${bdisk:uxname}
-
-; Where should the bootstrap tarballs extract to and the
-; chroots be built?
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 chrootdir = /var/tmp/chroots
-
-; Where is the base of the BDisk project located?
-; In other words, if you cloned BDisk from git,
-; what is BDisk's working tree directory?
-; 0.) No whitespace
-; 1.) Must exist and be populated with the BDisk's files
 basedir = /opt/dev/bdisk
-
-; This is the output directory of the ISO files when
-; done building. This should not be checked into git.
-; (The files will be very big!)
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 isodir = ${dlpath}/iso
-
-; This is a directory where we should save extra
-; source code we download (if we need it).
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist, and is needed
 srcdir = ${dlpath}/src
-
-; What directory should we use for staging?
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 prepdir = ${dlpath}/temp
-
-; Where should we stage the boot files?
-; This should not be the same dir as other options!
-; The default is recommended.
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 archboot = ${prepdir}/${bdisk:name}
-
-; What directory/path should we use as a base 
-; directory for mountpoints?
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 mountpt = /mnt/${bdisk:uxname}
-
-; Should we build a multiarch image? That is to say, the
-; same ISO file can be used for both i686 and x86_64.
-; 0.) Only accepts (case-insensitive):
-;	yes/true (buld both i686, x86_64 in same image)
-;	no/false (build separate images, both arch's)
-;	i686	 (ONLY build i686 architecture)
-;	x86_64	 (ONLY build x86_64 architecture)
-; If it is undefined, it is assumed to be no.
 multiarch = yes
-
-; Would you like to enable iPXE functionality?
-; Note that this has no bearing on the 'sync' sections,
-; so one can build e.g. only http files.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 ipxe =
-
-; This option should only be enabled if you are on a fairly
-; powerful, multicore system with plenty of RAM. It will
-; speed the build process along, but will have some
-; seriously adverse effects if your system can't handle it.
-; Most modern systems should be fine with leaving it enabled.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 i_am_a_racecar = yes
 
-
-#---------------------------------------------------------#
-# This section controls settings for signing our release
-#	files. This is only used if build:gpg is
-#       yes/true/etc.
-#---------------------------------------------------------#
 [gpg]
-
-; What is a valid key ID that we should use to
-; *sign* our release files?
-; 0.) You will be prompted for a passphrase if your
-;     key has one/you don't have an open and authorized
-;     gpg-agent session. Make sure you have a working
-;     pinentry configuration set up!
-; 1.) If you leave this blank we will use the key
-;     we generate automatically earlier in the build
-;     process.
-; 2.) We will generate one if this is blank and you
-;     have selected sign as yes.
 mygpgkey =
-
-; What directory should we use for the above GPG key?
-; Make sure it contains your private key.
 mygpghome =
 
-
-#---------------------------------------------------------#
-# This section controls what we should do with the
-#	resulting build and how to handle uploads, if we
-#	choose to use those features.
-#---------------------------------------------------------#
 [sync]
-
-; Should we generate/prepare HTTP files?
-; This is mostly only useful if you plan on using iPXE.
-; However, it can also include the built ISO file(s).
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 http = no
-
-; Should we generate/prepare TFTP files?
-; This is mostly only useful if you plan on using more
-; traditional (non-iPXE) setups and regualar PXE bootstrapping
-; into iPXE.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 tftp = no
-
-; Enable automatic Git pushing for any changes done to the
-; project itself? If you don't have upstream write access,
-; you'll want to set this to False.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 git = no
-
-; Enable rsync pushing for the ISO (and other files, if
-; you choose- useful for iPXE over HTTP(S)).
 rsync = no
 
-
-#---------------------------------------------------------#
-# This section controls details about HTTP file preparation/
-#	generation. Only used if sync:http = True (or
-#	'yes', etc.)
-#---------------------------------------------------------#
 [http]
-
-; This directory is where to build an HTTP webroot.
-; 0.) No whitespace
-; 1.) If blank, HTTP preparation/generation will not be done
-; 2.) If specified, it will be created if it doesn't exist
-; 3.) If it does exist, it will be deleted first- MAKE SURE
-;     you do not store files here that you want to keep.
 path = ${build:dlpath}/http
-
-; What user and group, if applicable, should the HTTP files
-; be owned as? This is most likely going to be either 'http',
-; 'nginx', or 'apache'.
-; 0.) No whitespace
-; 1.) User must exist on system
-; 2.) If path is blank, they will not be used
 user = http
 group = http
 
-
-#---------------------------------------------------------#
-# This section controls details about TFTP file
-#	preparation/generation. Only used if
-#	sync:tftp = True (or 'yes', etc.)
-#---------------------------------------------------------#
 [tftp]
-
-; The directory where we want to build a TFTP root.
-; 0.) No whitespace
-; 1.) If blank, TFTP preparation/generation will not be done
-; 2.) If specified, it will be created if it doesn't exist
-; 3.) If it does exist, it will be deleted first- MAKE SURE
-;     you do not store files here that you want to keep.
 path = ${build:dlpath}/tftpboot
-
-; What user and group, if applicable, should the TFTP files
-; be owned as? This is most likely going to be either 'tftp'
-; or 'root'.
-; 0.) No whitespace
-; 1.) User must exist on system
-; 2.) If sync:tftp is blank, they will not be used
 user = root
 group = root
 
-
-#---------------------------------------------------------#
-# This section controls aspects of iPXE building. Only used
-#	if build:ipxe = True (or 'yes', etc.)
-#---------------------------------------------------------#
 [ipxe]
-
-; Build a "mini-ISO"; that is, an ISO file that can be used
-; to bootstrap an iPXE environment (so you don't need to set
-; up a traditional PXE environment on your LAN). We'll still
-; build a full standalone ISO no matter what.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; 1.) Requires actual git to be installed.
-; If it is undefined, it is assumed to be no.
 iso = no
-
-; What URI should iPXE's EMBED script use?
-; If you require HTTP BASIC Authentication or HTTP Digest
-; Authentication (untested), you can format it via:
-;
-;	https://user:password@domain.tld/page.php
-;
-; This currently does not work for HTTPS with self-signed
-; certificates.
-; 0.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 1.) Must be a valid URI understood by minimal versions
-;	of curl.
 uri = https://bdisk.square-r00t.net
-
-; Directory to hold SSL results, if we are generating
-; keys, certificates, etc.
 ssldir = ${build:dlpath}/ssl
-
-; Path to the (root) CA certificate file iPXE should use.
-; Note that you can use your own CA to sign existing certs.
-; See http://ipxe.org/crypto for more info. This is handy if
-; you run a third-party/"Trusted" root-CA-signed certificate
-; for the HTTPS target.
-; 0.) No whitespace
-; 1.) Must be in PEM/X509 format
-; 2.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 3.) If it exists, a matching key (ssl_cakey) MUST be
-;     specified
-; 4.) HOWEVER, if left blank/doesn't exist, one will be
-; 	automatically generated
 ssl_ca = ${ssldir}/ca.crt
-
-; Path to the (root) CA key file iPXE should use.
-; 0.) No whitespace
-; 1.) Must be in PEM/X509 format
-; 2.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 3.) If left blank or it doesn't exist (and ssl_ca is also
-; 	blank), one will be automatically generated
-; 4.) MUST match ssl_ca if specified/exists
-; 5.) MUST NOT be passphrase-protected
 ssl_cakey = ${ssldir}/ca.key
-
-; Path to the CLIENT certificate iPXE should use.
-; 0.) No whitespace
-; 1.) Must be in PEM/X509 format
-; 2.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 3.) If specified/existent, a matching CA cert (ssl_ca)
-; 	and key (ssl_cakey) MUST be specified
-; 4.) HOWEVER, if left blank/nonexistent, one will be generated
-; 5.) MUST be signed by ssl_ca/ssl_ca if specified
 ssl_crt = ${ssldir}/main.crt
-
-; Path to the CLIENT key iPXE should use.
-; 0.) No whitespace
-; 1.) Must be in PEM/X509 format
-; 2.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 4.) If left blank/nonexistent (and ssl_ca is also blank),
-;	one will be automatically generated
 ssl_key = ${ssldir}/main.key
 
-
-#---------------------------------------------------------#
-# This section controls aspects of rsync pushing. Only used
-# if sync:rsync = True (or 'yes', etc.)
-#---------------------------------------------------------#
 [rsync]
-
-; This is the rsync destination host.
 host = 
-
-; This is the remote user we should use when performing the
-; rsync push.
 user = 
-
-; This is the remote destination path we should use for
-;	pushing via rsync.
-; 0.) No whitespace
-; 1.) The path MUST exist on the remote host
-; 2.) The path MUST be writable by rsync:user
-; RECOMMENDED: you'll probably want to set http:(user|group)
-;	to what it'll need to be on the destination.
 path = 
-
-; Should we rsync over the ISO files too, or just the boot
-; files?
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
 iso = yes

extra/pkg.build.ini

@@ -5,515 +5,82 @@
 # This file is used to define various variables/settings
 # used by the build script.
 #
-# It is well-commented, and uses INI syntax.
+# For full (perhaps overly-verbose ;) documentation, please
-# See https://wiki.python.org/moin/ConfigParserExamples
+# see:
-# for some advanced features if you would like to use
+# https://bdisk.square-r00t.net/#_the_code_build_ini_code_file
-# them.
+# Or simply refer to the section titled "The build.ini File"
-# Blank lines are ignored. Section integrity is important.
+# in the user manual.
-# #- and ;-prefixed lines are comments and are not parsed.
-# If restrictions on input are present, they will be
-# given in a numerical list.
 
-#---------------------------------------------------------#
-# This section controls some aspects about the live
-#	environment itself.
-#---------------------------------------------------------#
 [bdisk]
-
-; The name of the project. If you roll your own and don't
-;	want it called the default, here's where you change it.
-; 0.) Alphanumeric only
-; 1.) 8 characters total or less
-; 2.) No whitespace
-; 3.) ASCII *only*
-; 4.) Will be converted to uppercase if it isn't already
 name = BDISK
-
-; This is used for filenames, etc.
-; I highly recommend it be the same as 'name', but
-;	lowercase.
-; 0.) Alphanumeric only
-; 1.) No whitespace
-; 2.) ASCII *only*
-; 3.) Will be converted to lowercase if it isn't already
 uxname = bdisk
-
-; This string is used for "pretty-printing" of the name.
-; 0.) Can contain whitespace
-; 1.) Can be mixed-case, uppercase, or lowercase
-; 2.) ASCII *only*
 pname = BDisk
-
-; What version is this?
-; If we don't have a version specified here, we'll
-; try to guess based on the current git commit in build:basedir.
-; 0.) No whitespace
 ver =
-
-; Your/your organization's name.
-; The same rules as 'pname' apply:
-; 0.) Can contain whitespace
-; 1.) Can be mixed-case, uppercase, or lowercase
-; 2.) ASCII *only*
 dev = A Developer
-
-; Your email address.
-; This is only used for commit messages (sync:git),
-; or GPG-signing the releases (see the associated build
-; section items).
 email = dev@domain.tld
-
-; What this distribution/project is used for.
-; 0.) Can contain whitespace
-; 1.) Can be mixed-case, uppercase, or lowercase
-; 2.) ASCII *only*
 desc = A rescue/restore live environment.
-
-; What is your livedistro's URL?
-; 0.) Should be a valid URI understood by minimal versions
-;	of curl.
 uri = https://domain.tld
-
-; Should the root user have a password? IF THIS IS NOT SET,
-; PASSWORD LOGIN WILL BE DISABLED! If you wish to have a
-; blank password, use the string:
-;	BLANK
-; Do NOT use a plaintext password here. You will need to
-; generate a salted and hashed string in a shadow-compatible
-; format. If you need help generating one, see docs/HOWTO.hashgen.
-; If an assistance script is available, the path will be given
-;	(i.e. extras/bin/hashgen.py).
-;
-; Note that if you want an automatic login, this is NOT where it
-; would be set. It should instead be controlled via:
-;	overlay/etc/systemd/system/getty@ttyN.service.d/autologin.conf
-; In the following format:
-;	[Service]
-;	Type=idle
-;	ExecStart=
-;	ExecStart=-/usr/bin/agetty --autologin <USERNAME> --noclear %I 38400 linux
-;(where N is the TTY number). Alternatively, if booting to a GUI, it
-; can be set as according to that GUI (e.g. for LXDE,
-; 	overlay/etc/lxdm/lxdm.conf, "autologin=<USERNAME>")
-; 0.) MUST be a salted SHA512 string in shadow format
-; 1.) ALL $'s (there should be three of them) MUST be escaped with a second $.
-;	e.g.:  $6$aBcDeFgHiJ$ZxYw.... would become $$6$$aBcDeFgHiJ$$ZxYw...
 root_password =
-
-; Should we create a non-root user on the image?
-; Note that this user has full sudo access.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 user = yes
 
-
-#---------------------------------------------------------#
-# This section controls aspects about bdisk:user.
-# Only used if bdisk:user set to True/yes/etc.
-#---------------------------------------------------------#
 [user]
-
-; What username should we use for the live system?
-; Standard *nix username rules apply:
-;	0.) ASCII only
-;	1.) 32 characters or less
-;	2.) Alphanumeric only
-;	3.) Lowercase only
-;	4.) No whitespace
-;	5.) Cannot start with a number
 username = ${bdisk:uxname}
-
-; What comment/description should be used for the user?
-; See passwd(5) if you need details on this.
-; 0.) ASCII only
 name = Default user
-
-; What password should be set for the user, if any?
-; See bdisk:root_password for how to generate this.
-; DO NOT PUT A PLAINTEXT PASSWORD HERE.
 password =
 
-#---------------------------------------------------------#
-# This section controls some aspects about the host
-#	and things like filesystem paths, etc.
-#---------------------------------------------------------#
 [build]
-
-; What is the mirror for your bootstrap tarball?
-; It is *highly* recommended you use an Arch Linux tarball
-; as the build process is highly specialized to this.
-; 0.) No whitespace
-; 1.) Must be accessible remotely (no local file paths)
 mirror = mirror.us.leaseweb.net
-
-; What is the protocol for the bootstrap mirror?
-; 0.) Must be one of:
-; 	http, https, ftp
 mirrorproto = https
-
-; What is the path to the tarball directory?
-; 0.) Must be a complete path
-; 	(e.g. /dir1/subdir1/subdir2/
-; 1.) No whitespace
 mirrorpath = /archlinux/iso/latest/
-
-; What is the filename for the tarball found in the above?
-; If left blank, we will use the sha1 checksum file to try
-; to guess the most recent file.
 mirrorfile =
-
-; What is the path to a sha1 checksum file?
-; 0.) No whitespace
-; 1.) Must be the full path
-; 2.) Don't include the mirror domain or protocol
 mirrorchksum = ${mirrorpath}sha1sums.txt
-
-; Optional GPG checking.
-; If the file has a GPG signature file,
-; we can use it for extra checking.
-; If it's blank, GPG checking will be disabled.
-; If you specify just '.sig' (or use the default
-; and don't actually specify a mirrorfile),
-; we'll try to guess based on the file from the sha1
-; checksums. Note that this must evaluate to a full
-; URL (e.g.:
-;	${mirrorproto}://${mirror}${mirrorpath}somefile.sig)
-; 0.) No whitespace (if specified)
-; 1.) Must be the full path
 mirrorgpgsig =
-
-; What is a valid key ID that should be used to
-; verify the tarballs?
-; 0.) Only used if mirrorgpgsig is set
-; 1.) Should be in the "shortform"
-;	(e.g. 7F2D434B9741E8AC)
 gpgkey = 7F2D434B9741E8AC
-
-; What is a valid keyserver we should use
-; to fetch gpgkey?
-; 0.) Only used if mirrorgpgsig is set
-; 1.) The default (blank) is probably fine.
-;     If you don't specify a personal GPG config
-;     (under the gpg section), then you'll definitely probably
-;     want to leave this blank.
-; 2.) If set, make sure you use a valid URI (e.g.:
-;     hkp://pgp.mit.edu )
 gpgkeyserver =
-
-; Should we sign our release files? (See the GPG section)
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
 gpg = no
-
-; Where should we save the bootstrap tarballs?
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 dlpath = /var/tmp/${bdisk:uxname}
-
-; Where should the bootstrap tarballs extract to and the
-; chroots be built?
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 chrootdir = /var/tmp/chroots
-
-; Where is the base of the BDisk project located?
-; In other words, if you cloned BDisk from git,
-; what is BDisk's working tree directory?
-; 0.) No whitespace
-; 1.) Must exist and be populated with the BDisk's files
 basedir = /opt/dev/bdisk
-
-; This is the output directory of the ISO files when
-; done building. This should not be checked into git.
-; (The files will be very big!)
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 isodir = ${dlpath}/iso
-
-; This is a directory where we should save extra
-; source code we download (if we need it).
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist, and is needed
 srcdir = ${dlpath}/src
-
-; What directory should we use for staging?
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 prepdir = ${dlpath}/temp
-
-; Where should we stage the boot files?
-; This should not be the same dir as other options!
-; The default is recommended.
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 archboot = ${prepdir}/${bdisk:name}
-
-; What directory/path should we use as a base
-; directory for mountpoints?
-; 0.) No whitespace
-; 1.) Will be created if it doesn't exist
 mountpt = /mnt/${bdisk:uxname}
-
-; Should we build a multiarch image? That is to say, the
-; same ISO file can be used for both i686 and x86_64.
-; 0.) Only accepts (case-insensitive):
-;	yes/true (buld both i686, x86_64 in same image)
-;	no/false (build separate images, both arch's)
-;	i686	 (ONLY build i686 architecture)
-;	x86_64	 (ONLY build x86_64 architecture)
-; If it is undefined, it is assumed to be no.
 multiarch = yes
-
-; Would you like to enable iPXE functionality?
-; Note that this has no bearing on the 'sync' sections,
-; so one can build e.g. only http files.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 ipxe = no
-
-; This option should only be enabled if you are on a fairly
-; powerful, multicore system with plenty of RAM. It will
-; speed the build process along, but will have some
-; seriously adverse effects if your system can't handle it.
-; Most modern systems should be fine with leaving it enabled.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 i_am_a_racecar = no
 
-
-#---------------------------------------------------------#
-# This section controls settings for signing our release
-#	files. This is only used if build:gpg is
-#       yes/true/etc.
-#---------------------------------------------------------#
 [gpg]
-
-; What is a valid key ID that we should use to
-; *sign* our release files?
-; 0.) You will be prompted for a passphrase if your
-;     key has one/you don't have an open and authorized
-;     gpg-agent session. Make sure you have a working
-;     pinentry configuration set up!
-; 1.) If you leave this blank we will use the key
-;     we generate automatically earlier in the build
-;     process.
-; 2.) We will generate one if this is blank and you
-;     have selected sign as yes.
 mygpgkey =
-
-; What directory should we use for the above GPG key?
-; Make sure it contains your private key.
 mygpghome =
 
-
-#---------------------------------------------------------#
-# This section controls what we should do with the
-#	resulting build and how to handle uploads, if we
-#	choose to use those features.
-#---------------------------------------------------------#
 [sync]
-
-; Should we generate/prepare HTTP files?
-; This is mostly only useful if you plan on using iPXE.
-; However, it can also include the built ISO file(s).
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 http = no
-
-; Should we generate/prepare TFTP files?
-; This is mostly only useful if you plan on using more
-; traditional (non-iPXE) setups and regualar PXE bootstrapping
-; into iPXE.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 tftp = no
-
-; Enable automatic Git pushing for any changes done to the
-; project itself? If you don't have upstream write access,
-; you'll want to set this to False.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; If it is undefined, it is assumed to be no.
 git = no
-
-; Enable rsync pushing for the ISO (and other files, if
-; you choose- useful for iPXE over HTTP(S)).
 rsync = no
 
-
-#---------------------------------------------------------#
-# This section controls details about HTTP file preparation/
-#	generation. Only used if sync:http = True (or
-#	'yes', etc.)
-#---------------------------------------------------------#
 [http]
-
-; This directory is where to build an HTTP webroot.
-; 0.) No whitespace
-; 1.) If blank, HTTP preparation/generation will not be done
-; 2.) If specified, it will be created if it doesn't exist
-; 3.) If it does exist, it will be deleted first- MAKE SURE
-;     you do not store files here that you want to keep.
 path = ${build:dlpath}/http
-
-; What user and group, if applicable, should the HTTP files
-; be owned as? This is most likely going to be either 'http',
-; 'nginx', or 'apache'.
-; 0.) No whitespace
-; 1.) User must exist on system
-; 2.) If path is blank, they will not be used
 user = http
 group = http
 
-
-#---------------------------------------------------------#
-# This section controls details about TFTP file
-#	preparation/generation. Only used if
-#	sync:tftp = True (or 'yes', etc.)
-#---------------------------------------------------------#
 [tftp]
-
-; The directory where we want to build a TFTP root.
-; 0.) No whitespace
-; 1.) If blank, TFTP preparation/generation will not be done
-; 2.) If specified, it will be created if it doesn't exist
-; 3.) If it does exist, it will be deleted first- MAKE SURE
-;     you do not store files here that you want to keep.
 path = ${build:dlpath}/tftpboot
-
-; What user and group, if applicable, should the TFTP files
-; be owned as? This is most likely going to be either 'tftp'
-; or 'root'.
-; 0.) No whitespace
-; 1.) User must exist on system
-; 2.) If sync:tftp is blank, they will not be used
 user = root
 group = root
 
-
-#---------------------------------------------------------#
-# This section controls aspects of iPXE building. Only used
-#	if build:ipxe = True (or 'yes', etc.)
-#---------------------------------------------------------#
 [ipxe]
-
-; Build a "mini-ISO"; that is, an ISO file that can be used
-; to bootstrap an iPXE environment (so you don't need to set
-; up a traditional PXE environment on your LAN). We'll still
-; build a full standalone ISO no matter what.
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
-; 1.) Requires actual git to be installed.
-; If it is undefined, it is assumed to be no.
 iso = no
-
-; What URI should iPXE's EMBED script use?
-; If you require HTTP BASIC Authentication or HTTP Digest
-; Authentication (untested), you can format it via:
-;
-;	https://user:password@domain.tld/page.php
-;
-; This currently does not work for HTTPS with self-signed
-; certificates.
-; 0.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 1.) Must be a valid URI understood by minimal versions
-;	of curl.
 uri = https://domain.tld
-
-; Directory to hold SSL results, if we are generating
-; keys, certificates, etc.
 ssldir = ${build:dlpath}/ssl
-
-; Path to the (root) CA certificate file iPXE should use.
-; Note that you can use your own CA to sign existing certs.
-; See http://ipxe.org/crypto for more info. This is handy if
-; you run a third-party/"Trusted" root-CA-signed certificate
-; for the HTTPS target.
-; 0.) No whitespace
-; 1.) Must be in PEM/X509 format
-; 2.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 3.) If it exists, a matching key (ssl_cakey) MUST be
-;     specified
-; 4.) HOWEVER, if left blank/doesn't exist, one will be
-; 	automatically generated
 ssl_ca = ${ssldir}/ca.crt
-
-; Path to the (root) CA key file iPXE should use.
-; 0.) No whitespace
-; 1.) Must be in PEM/X509 format
-; 2.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 3.) If left blank or it doesn't exist (and ssl_ca is also
-; 	blank), one will be automatically generated
-; 4.) MUST match ssl_ca if specified/exists
-; 5.) MUST NOT be passphrase-protected
 ssl_cakey = ${ssldir}/ca.key
-
-; Path to the CLIENT certificate iPXE should use.
-; 0.) No whitespace
-; 1.) Must be in PEM/X509 format
-; 2.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 3.) If specified/existent, a matching CA cert (ssl_ca)
-; 	and key (ssl_cakey) MUST be specified
-; 4.) HOWEVER, if left blank/nonexistent, one will be generated
-; 5.) MUST be signed by ssl_ca/ssl_ca if specified
 ssl_crt = ${ssldir}/main.crt
-
-; Path to the CLIENT key iPXE should use.
-; 0.) No whitespace
-; 1.) Must be in PEM/X509 format
-; 2.) REQUIRED if iso and/or usb is set to True/yes/etc.
-; 4.) If left blank/nonexistent (and ssl_ca is also blank),
-;	one will be automatically generated
 ssl_key = ${ssldir}/main.key
 
-
-#---------------------------------------------------------#
-# This section controls aspects of rsync pushing. Only used
-# if sync:rsync = True (or 'yes', etc.)
-#---------------------------------------------------------#
 [rsync]
-
-; This is the rsync destination host.
 host =
-
-; This is the remote user we should use when performing the
-; rsync push.
 user =
-
-; This is the remote destination path we should use for
-;	pushing via rsync.
-; 0.) No whitespace
-; 1.) The path MUST exist on the remote host
-; 2.) The path MUST be writable by rsync:user
-; RECOMMENDED: you'll probably want to set http:(user|group)
-;	to what it'll need to be on the destination.
 path =
-
-; Should we rsync over the ISO files too, or just the boot
-; files?
-; 0.) Only accepts (case-insensitive):
-;	yes|no
-;	true|false
-;	1|0
 iso = no

extra/pre-build.d/etc/mkinitcpio.conf

@@ -3,7 +3,7 @@
 # run.  Advanced users may wish to specify all system modules
 # in this array.  For instance:
 #     MODULES="piix ide_disk reiserfs"
-MODULES="overlay ata_generic ata_piix loop nls_cp437 ext4 raid456 vfat netconsole"
+MODULES="overlay ata_generic ata_piix loop nls_cp437 ext4 raid456 vfat netconsole isofs"
 
 # BINARIES
 # This setting includes any additional binaries a given user may

extra/pre-build.d/root/pre-build.sh

@@ -115,7 +115,6 @@ ln -s /usr/lib/libdialog.so.1.2 /usr/lib/libdialog.so
 cleanPacorigs
 apacman --noconfirm --noedit --skipinteg -S --needed linux
 apacman --gendb
-#mv -f /boot/vmlinuz-linux /boot/vmlinuz-linux-${DISTNAME}
 cleanPacorigs
 
 # And install EXTRA functionality packages, if there are any.
@@ -161,7 +160,6 @@ else
 	usermod -L root
 fi
 cleanPacorigs
-mv -f /boot/initramfs-linux.img /boot/initramfs-linux-${DISTNAME}.img
 # And install arch-specific extra packages, if there are any.
 #PKGLIST=$(sed -re '/^[[:space:]]*(#|$)/d' /root/packages.arch | tr '\n' ' ')
 PKGLIST=$(getPkgList /root/packages.arch)

extra/templates/iPXE/BIOS/isolinux.cfg.j2

@@ -3,5 +3,5 @@ PROMPT 0
 TIMEOUT 10
 
 LABEL ipxe
-  KERNEL boot/ipxe.krn
+KERNEL /boot/ipxe.krn