commit cf603e52657a217aa0130278e143e08bb62f4904 Author: brent s Date: Fri Dec 19 14:13:30 2014 -0500 initial commit diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..e778be5 --- /dev/null +++ b/.gitignore @@ -0,0 +1,25 @@ +# We don't want local build settings +/build.conf + +# The chroots should be generated locally ONLY. The perms/ownership would get futzed up anyways if checked into git. +/root.x86_64 +/root.i686 + +# We don't want the copied/stripped/compressed chroots +/build64 +/build32 + +# We don't need these in git. They should be generated dynamically. +/http +/iso +/temp +/TMPBOOT +/tftpboot +/latest.64.tar.gz +/latest.32.tar.gz +/lockfile.lck +/VERSION_INFO.txt +/BUILDNO +/screenlog* +/logs +*.swp diff --git a/README b/README new file mode 100644 index 0000000..20b94b8 --- /dev/null +++ b/README @@ -0,0 +1,142 @@ +###################################################################################################################################### +##### BDisk ##### +##### ##### +##### Written by Brent Saner ##### +##### ##### +##### Built upon my (Brent's) 'BDisk' ISO-building framework (http://bdisk.square-r00t.net) ##### +###################################################################################################################################### + +## Why Arch? ## +Because it's a largely easy-to-use, well-documented (https://wiki.archlinux.org/) distro. It's no-frills and incredibly +flexible/customizable, and can be made rather slim. It's also very friendly to run as a chroot inside any other distro. + +All commands below should be issued in the root working directory of this git repository. (For me, this is +/opt/dev/work/BDisk but this may be entirely different for you, depending on where you cloned the repository to.) + +!!!!!! WARNING !!!!!!! +I do NOT recommend running this on a machine that is using wireless, as it will download a LOT of data. +If you ignore this warning, be prepared to explain to anyone you share your wifi with why Facebook takes 20 seconds to load, +because they WILL ask. + +It should be fine over ethernet, since hardware switches are much faster and efficient than a single duplex wireless radio. + +Future versions, once this project has a dumping ground, will fetch highly compressed snapshotted chroot filesystems instead +of dynamically building the entire install chroots (both x86_64 and i686) instead (with the option of building fresh locally, +disabled by default). +Till then, sorry for the inconvenience. +!!!!!!!!!!!!!!!!!!!!!! + +## Prerequisites ## +-At least ~20Gb disk space free (remember, you need room for not only four chroots (one developing and one staging for i686/x86_64), +but also disk space for working, the finished ISO(s), etc.) + +-The following packages installed on the build host: +(NOTE: future versions will have dependencies checked automatically and installed if necessary, +depending on distro your host build machine is. the OS detection and package installation component of that isn't +done yet though. 2014.10.31) + +curl +dosfstools +libisoburn ("libisofs" on CentOS) +lynx +rsync +sed +squashfs-tools +xorriso (in RPMForge repo for CentOS 7) +xz + +and *probably* a few others. the scripts run with set -e for the most part, so if something's missed, you'll know. +oh, you will know. + + +## (Re)Building ## +$ sudo bin/build.sh + +Yeah. It's that easy. The finished product is in iso/. + +Build output should look something like this: + + +[root@dawid BDisk]# time nice -n "-19" bin/build.sh +You have not configured a build.conf OR you are not running from the project's root directory (the git repository's working directory). + If you are indeed in the correct directory, you may copy the sample at extra/build.conf.sample, + edit it for appropriate values, and copy to /build.conf +For now, though, I am copying over the default. +Checking directory structure and creating lockfile at /opt/dev/work/BDisk/lockfile.lck... +/opt/dev/work/BDisk/root.i686 does not exist - creating. +/opt/dev/work/BDisk/root.x86_64 does not exist - creating. +/opt/dev/work/BDisk/build32 does not exist - creating. +/opt/dev/work/BDisk/build64 does not exist - creating. +/opt/dev/work/BDisk/iso does not exist - creating. +/opt/dev/work/BDisk/temp/bdisk does not exist - creating. +/opt/dev/work/BDisk/temp/FPOS does not exist - creating. +/opt/dev/work/BDisk/src does not exist - creating. +/opt/dev/work/BDisk/tftpboot does not exist - creating. +/opt/dev/work/BDisk/http/FPOS does not exist - creating. +/opt/dev/work/BDisk/logs does not exist - creating. +No existing chroot environment found. Creating... +Now importing settings/variables. +Checking/fetching snapshots... +Extracting snapshots. This will take a while... +Configuring snapshots... +Initializing chroots... +Prepping /opt/dev/work/BDisk/root.i686. This will take a while... +...Key initializing...Done. +...Importing keys...Done. +...Installing base packages...Done. +...Upgrading any outdated packages...Done. Finishing/cleaning up... +Prepping /opt/dev/work/BDisk/root.x86_64. This will take a while... +...Key initializing...Done. +...Importing keys...Done. +...Installing base packages...Done. +...Upgrading any outdated packages...Done. Finishing/cleaning up... +Installing common packages... +...Packages installing to /opt/dev/work/BDisk/root.i686...Compiling kernel sources...Regular packages......Creating bdisk user...Done. +Done. +...Packages installing to /opt/dev/work/BDisk/root.x86_64...Compiling kernel sources...Regular packages......Creating bdisk user...Done. +Done. +Installing packages for 32-bit... +Done. +Installing packages for 64-bit... +Done. +Syncing overlay... +Done. +Chroot setup complete. +Checking for appropriate kernel version and mksquashfs version... +Data is not sync'd to buildroot; syncing... +Syncing important files to /opt/dev/work/BDisk/build64 for building the squashed filesystem (this may take some time)... +Compressing the package DB... +cp: ‘/opt/dev/work/BDisk/build64/usr/share/zoneinfo/EST5EDT’ and ‘/opt/dev/work/BDisk/build64/etc/localtime’ are the same file +cp: ‘/opt/dev/work/BDisk/root.x86_64/usr/share/zoneinfo/EST5EDT’ and ‘/opt/dev/work/BDisk/root.x86_64/etc/localtime’ are the same file +Cleaning up unnecessary cruft in /opt/dev/work/BDisk/build64... +[64-bit] Now generating the squashed image (if we need to) and hashes. This may take some time. +[64-bit] Squashing filesystem. This can take a while depending on the size of your chroot(s). +[64-bit] Copying files for PXE, and ISO building, please be patient. +Data is not sync'd to buildroot; syncing... +Syncing important files to /opt/dev/work/BDisk/build32 for building the squashed filesystem (this may take some time)... +Compressing the package DB... +cp: ‘/opt/dev/work/BDisk/build32/usr/share/zoneinfo/EST5EDT’ and ‘/opt/dev/work/BDisk/build32/etc/localtime’ are the same file +cp: ‘/opt/dev/work/BDisk/root.i686/usr/share/zoneinfo/EST5EDT’ and ‘/opt/dev/work/BDisk/root.i686/etc/localtime’ are the same file +Cleaning up unnecessary cruft in /opt/dev/work/BDisk/build32... +[32-bit] Now generating the squashed image (if we need to) and hashes. This may take some time. +[32-bit] Squashing filesystem. This can take a while depending on the size of your chroot(s). +[32-bit] Copying files for PXE, and ISO building, please be patient. +Building the actual .iso image. This may take a while. +Setting up EFI stuff... +Checking/fetching UEFI shells... +Generating the EFI embedded FAT filesystem... +EFI configuration complete... +ISO generated; size is 1.3G. +You can find it at /opt/dev/work/BDisk/iso/bdisk-v1.04-a8666bd-any.iso +Cleaning up some stuff leftover from the build... +Finished successfully! + +real 250m48.104s +user 163m6.046s +sys 8m26.573s + + + + + +If you want more verbosity, check out the logs/ directory. diff --git a/TODO b/TODO new file mode 100644 index 0000000..49f536b --- /dev/null +++ b/TODO @@ -0,0 +1,38 @@ +## General ## + +-include WinMTR, build Mac OS X MTR for dist/tools on CD + + +## NETWORKING ## + +-shorewall/some other firewall? +-WISH: locked-down VPN? +-autodetection/configuration of network. DHCP is currently running by default, but does it need to support IPv6? if so, how would the user configure their network? +-WISH: support iPXE? would save on ISO file size (letting us create MUCH bigger squash systems), but the downside is we lose EFI support and it requires a working network configuration- which defeats the purpose of a diagnostic disc. + + +## Building ## + +-WISH: Better logging[0] +-use manual chrooting functions ONLY if distro not detected as arch. if /usr/bin/systemd-nspawn exists, use that instead +--does arch-chroot work across all distros? see https://wiki.archlinux.org/index.php/Install_bundled_32-bit_system_in_Arch64 and https://wiki.archlinux.org/index.php/Chroot +--i think this might be unnecessary. testing across other major distros is necessary, but i think i can just use the chroot'd arch-chroot +-tweak build.conf (and build.conf.sample) to source the pwd and set as BASEDIR ***if*** the project resources are present in pwd, otherwise throw warning +--this is half-done;PWD is currently used by default. +-does gummiboot? loader? wtfever it's called support splash backgrounds? can i implement that differently somehow? +-Host-specific chroot customizations (i.e. -J in /etc/makepkg.conf +-strip out/remove unnecessary and orphan packages (e.g. gcc, make, automake, etc.) + +__________________________________________________________ +FOOTNOTES: + + +[0] I'd really like to implement the following in build.conf; like: +http://forums.fedoraforum.org/showthread.php?t=275743 +# The following is the setting for "verbosity". A more accurate way of saying it is how output should be handled. +# Note that for it to be properly parsed, it MUST be in the form of a linear array (e.g. VAR=(1 2 3) ). +# '| tee -a ${BASEDIR}/logs/${FUNCNAME}.$(date +%s)' means "display output for STDOUT and STDERR, and also log STDOUT to logs/.EPOCH_TIME" +# '2>&1 /dev/null' means "hide STDOUT and STDERR, no logging" +# '>> ${BASEDIR}/logs/${FUNCNAME}.$(date +%s) 2>&1' means "log both STDOUT and STDERR to logs/.EPOCH_TIME, no output" +# '>> ${BASEDIR}/logs/${FUNCNAME}.$(date +%s)' means "log STDOUT to logs/.EPOCH_TIME, display (but don't log) STDERR)" +# '' means "no logging; display both STDOUT and STDERR" diff --git a/bin/build.sh b/bin/build.sh new file mode 100755 index 0000000..cd45f20 --- /dev/null +++ b/bin/build.sh @@ -0,0 +1,197 @@ +#!/bin/bash + +# A lot of snippets, inspiration, and some config directives are from https://projects.archlinux.org/archiso.git/ / the ArchLinux ISO layout. +# Many thanks and praise are deserved. + + +#DEBUG +#set -x + +## Import settings +if [ -f "build.conf" ]; +then + echo "Now importing settings/variables." + set -e + source extra/build.conf.sample + source build.conf + set +e +else + echo "You have not configured a build.conf OR you are not running from the project's root directory (the git repository's working directory). + If you are indeed in the correct directory, you may copy the sample at extra/build.conf.sample, + edit it for appropriate values, and copy to /build.conf" + echo 'For now, though, I am using the defaults. If the build fails complaining about a' + echo 'missing http user, you need to specify a custom/distro-pertinent one.' + cp extra/build.conf.sample build.conf + set -e + source extra/build.conf.sample + set +e +fi + + +## PREPARATION ## + +# safemode browsing enabled. lolz +set -e + +# do some basic error checking +ARCH=$(uname -m) + +if [[ ${EUID} -ne 0 ]]; +then + #echo "This script must be run as root" 1>&2 + echo "This script must be run as root." + exit 1 +elif [ -f ${LOCKFILE} ]; +then + echo "Script already running, stale lockfile present, or an error occurred during last run." + echo "Please clear ${LOCKFILE} by hand before attempting another build." + echo -n "Timestamp of lockfile is: " + ls -l ${LOCKFILE} | awk '{print $6" "$7" "$8}' + exit 1 +elif [[ "$(uname -s)" != "Linux" ]]; +then + echo "ERROR: This script is only supported on GNU/Linux." + exit 1 +elif [[ "${ARCH}" != 'x86_64' ]]; +then + echo "Your hardware architecture, ${ARCH}, is not supported. Only x86_64 is supported." + echo "Dying now." + exit 1 +fi + +echo "Checking directory structure and creating lockfile at ${LOCKFILE}..." +touch ${LOCKFILE} + +# make sure the paths exist and then check for an existing chroot session +for i in ${ROOTDIR} ${CHROOTDIR32} ${CHROOTDIR64} ${BUILDDIR}32 ${BUILDDIR}64 ${ISODIR} ${MOUNTPT} ${TEMPDIR}/{${UXNAME},${DISTNAME}} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR}/${DISTNAME} ${BASEDIR}/logs; +do + if [ ! -d ${i} ]; + then + echo "${i} does not exist - creating." + mkdir -p ${i} + fi +done + +if [ ! -f "./BUILDNO" ]; +then + echo '0' > ./BUILDNO +fi + +CHROOTDIR_GLOB="${CHROOTDIR}" +BUILDDIR_GLOB="${BUILDDIR}" + +# Set the version. +VERSION="$(git describe --abbrev=0 --tags)-$(git rev-parse --short --verify HEAD)" +BUILD="$(cat BUILDNO)" +BUILD="$(expr ${BUILD} + 1)" +echo ${BUILD} > ./BUILDNO +BUILDTIME="$(date)" +BUILD_MACHINE="$(hostname -f)" +#BUILD_USERNAME="${SUDO_USER}" +#BUILD_USERNAME="$(who am i | awk '{print $1}')" +set +e ; logname > /dev/null 2>&1 +if [[ "${?}" == "0" ]]; +then + BUILD_USERNAME="$(logname)" +else + BUILD_USERNAME="$(whoami)" +fi +set -e +USERNAME_REAL="$(grep ${BUILD_USERNAME} /etc/passwd | cut -f5 -d':')" + +cat > VERSION_INFO.txt << EOF +Version: ${VERSION} +Build: ${BUILD} +Time: ${BUILDTIME} +Machine: ${BUILD_MACHINE} +User: ${BUILD_USERNAME} (${USERNAME_REAL}) +EOF + +## FUNCTIONS ## + +source lib/00-im_batman.func.sh +source lib/01-holla_atcha_boi.func.sh +source lib/02-release_me.func.sh +source lib/03-facehugger.func.sh +source lib/04-chroot_wrapper.func.sh +source lib/05-jenny_craig.func.sh +source lib/06-centos_is_stupid.func.sh +source lib/07-will_it_blend.func.sh +source lib/08-stuffy.func.sh +source lib/09-yo_dj.func.sh +source lib/10-mentos.func.sh + +## The Business-End(TM) ## + +CHROOTDIR="${CHROOTDIR_GLOB}" +BUILDDIR="${BUILDDIR_GLOB}" +holla_atcha_boi + +rm -rf ${TEMPDIR}/* +release_me 64 > /dev/null 2>&1 +release_me 32 > /dev/null 2>&1 + +# do we need to perform any updates? +if [[ -f "${CHROOTDIR}root.x86_64/root/chroot" || -f "${CHROOTDIR}root.i686/root/chroot" ]]; +then + chroot_wrapper 64 + chroot_wrapper 32 + centos_is_stupid + will_it_blend 64 + will_it_blend 32 + yo_dj +fi + +if [[ ${1} == "update" ]]; +then + mentos + centos_is_stupid + will_it_blend 32 + will_it_blend 64 + yo_dj +fi + +# or do we want to just chroot in? +if [[ ${1} == "chroot" ]]; +then + chroot_wrapper 64 + chroot_wrapper 32 + rm -f ${LOCKFILE} + exit 0 +fi + +# or are we just building? +if [[ ${1} == "build" ]] || [ -z ${1} ] || [[ ${1} == "all" ]]; +then + if [[ "${MULTIARCH}" == "y" ]]; + then + centos_is_stupid + will_it_blend 64 + will_it_blend 32 + yo_dj any + else + centos_is_stupid + will_it_blend 64 + yo_dj 64 + centos_is_stupid + will_it_blend 32 + yo_dj 32 + fi +fi + +# clean up, clean up, everybody, everywhere +echo "Cleaning up some stuff leftover from the build..." +#rm -rf ${TEMPDIR}/* +#rm -rf ${SRCDIR}/* +cd ${ROOTDIR} + +if [[ "${GIT}" == "yes" ]]; +then + echo "Committing changes to git..." + git add --all . + git commit -m "post-build at $(date)" +fi + +# yay! we're done! +rm -f ${LOCKFILE} +echo "Finished successfully!" diff --git a/bin/clean.sh b/bin/clean.sh new file mode 100755 index 0000000..2acfd83 --- /dev/null +++ b/bin/clean.sh @@ -0,0 +1,84 @@ +#!/bin/bash + +## Import settings +if [ -f "build.conf" ]; +then + echo "Now importing settings/variables." + set -e + source extra/build.conf.sample + source build.conf + set +e +else + echo "You have not configured a build.conf OR you are not running from the project's root directory (the git repository's working directory). + echo "If you are indeed in the correct directory, you may copy the sample at ../extra/build.conf.sample, + echo "edit it for appropriate values, and copy to /build.conf" + echo + echo 'This error is fatal. Dying.' + exit 1 +fi + +if [[ ${EUID} -ne 0 ]]; +then + #echo "This script must be run as root" 1>&2 + echo "This script must be run as root." + echo + exit 1 +elif [ -f ${LOCKFILE} ]; +then + echo "Script already running, stale lockfile present, or an error occurred during last run." + echo "Please clear ${LOCKFILE} by hand before attempting another build." + echo -n "Timestamp of lockfile is: " + ls -l ${LOCKFILE} | awk '{print $6" "$7" "$8}' + exit 1 +fi + +echo "Creating lockfile at ${LOCKFILE}..." +touch ${LOCKFILE} + +if [[ "${1}" == "all" ]]; +then + DIRS="${CHROOTDIR}root.i686 ${CHROOTDIR}root.x86_64 ${BUILDDIR}32 ${BUILDDIR}64 ${ISODIR} ${TEMPDIR} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR} ${BASEDIR}/logs" + FILES="latest.32.tar.gz latest.64.tar.gz" +elif [[ "${1}" == "chroot" ]]; +then + DIRS="${CHROOTDIR}root.i686 ${CHROOTDIR}root.x86_64 ${BUILDDIR}32 ${BUILDDIR}64 ${ISODIR} ${TEMPDIR} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR}" + FILES="" +elif [[ "${1}" == "squash" ]]; +then + DIRS="${BUILDDIR}32 ${BUILDDIR}64 ${ISODIR} ${TEMPDIR} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR}" + FILES="" +else + DIRS="${ISODIR} ${TEMPDIR} ${ARCHBOOT} ${SRCDIR} ${TFTPDIR} ${HTTPDIR}" + FILES="" +fi + +echo "I will be deleting the contents of: ${DIRS}" +echo "I will be deleting the files: ${FILES}" +read -p 'Do you wish to continue? [Y/n] ' CONFIRM + +if [ -z "${CONFIRM}" ]; +then + CONFIRM="y" +fi + +CONFIRM=${CONFIRM:0:1} +CONFIRM=$(echo ${CONFIRM} | tr [[:upper:]] [[:lower:]]) + +if [[ "${CONFIRM}" != "y" ]]; +then + echo 'Exiting.' + exit 0 +fi + + +for i in "${DIRS}"; +do + rm -rf ${i}/* +done + +for i in "${FILES}"; +do + rm -f ${i} +done + +rm -f ${LOCKFILE} diff --git a/bin/mirror.lst.sh b/bin/mirror.lst.sh new file mode 100755 index 0000000..8bccbe3 --- /dev/null +++ b/bin/mirror.lst.sh @@ -0,0 +1,6 @@ +#!/bin/bash + +curl -s -o /tmp/mirrorlist.tmp "https://www.archlinux.org/mirrorlist/?country=US&protocol=http&protocol=https&ip_version=4&use_mirror_status=on" +sed -i -e 's/^#Server/Server/' /tmp/mirrorlist.tmp +rankmirrors -n 6 /tmp/mirrorlist.tmp > extra/mirrorlist +sed -i -e '/^##/d' extra/mirrorlist diff --git a/extra/bdisk.png b/extra/bdisk.png new file mode 100644 index 0000000..2db6aca Binary files /dev/null and b/extra/bdisk.png differ diff --git a/extra/bdisk.png.xcf b/extra/bdisk.png.xcf new file mode 100644 index 0000000..9dd674d Binary files /dev/null and b/extra/bdisk.png.xcf differ diff --git a/extra/build.conf.sample b/extra/build.conf.sample new file mode 100644 index 0000000..6c1af17 --- /dev/null +++ b/extra/build.conf.sample @@ -0,0 +1,133 @@ +##################################################### +## BUILD.CONF SAMPLE FILE ## +##################################################### +# +# This file is used to define various variables/settings used by the build script. +# + +# This should be an alpha-numeric string less than 8 characters. No spaces, etc. +# Used for metainfo +DISTNAME="BDISK" + +# This should be the lowercase format of ${DISTNAME} but it can be different. +# Used for filenames etc. so no spaces +UXNAME="bdisk" + +# Used for "pretty-formatted" version of the project. It can contain spaces etc. +PNAME="BDisk" + +# Your/your organization's name +DISTPUB="r00t^2" + +# What's this distro used for? +DISTDESC="j00 got 0wnz0r3d lulz." + +# This should be the directory of the root of the project, e.g. the git's project/working directory. +# This can be left as-is as long as you're running everything from the project directory root. +BASEDIR="$(pwd)" + +# This is the output directory of the ISO files when done building. This also should not be checked into git. +ISODIR="${BASEDIR}/iso" + +# Where source code is kept. +SRCDIR="${BASEDIR}/src" + +# Where we mount for chroots etc. +MOUNTPT="/mnt/${UXNAME}" + +# This is where an http webroot can be specified. Very useful for PXE setups +# (the resulting kernel/initrd can be set to boot from HTTP initiated by PXE). +# These files will be generated whether you use them or not, so it's recommended to keep this a sane path. +HTTPDIR="${BASEDIR}/http" + +# This is the root for where tftp files should be put for PXE booting. +TFTPDIR="${BASEDIR}/tftpboot" + +# This is the user and group your web daemon will use. The webroot is automatically chowned. +HTTPUSR="http" +HTTPGRP="http" + +# This is the user and group that your tftp files should be chowned as. +TFTPUSR="root" +TFTPGRP="root" + +# If set to "no", build separate ISOs for different hardware structures. +# E.g. a separate i686 and x86_64 ISO. Note that it's TOTALLY supported to +# build a dual-architecture ISO (and is the default), it's just that it tends to be over 700MB +# (and thus doesn't fit on a normal CD. Still fits on DVDs and USBs though!) +MULTIARCH="yes" + +# set to "yes" to enable pushing new changes to a git repo/committing to a local repo +GIT="no" + +# If this is set, use rsync to copy the http and iso files. This is the rsync destination host. +# This is *great* for iPXE. +RSYNC_HOST="" + +# Only used if RSYNC_HOST is set. The destination directory on the destination host to copy files to. +RSYNC_DEST="${BASEDIR}" + +# Where the log should go, and how it should be prefixed. +# Note that the code appends, rather than replaces, logs- hence the timestamp in EPOCH time format. +LOGFILE="${BASEDIR}/logs/$(date +%s)" + +# What should the regular username be? (Automatically logged in on boot) +REGUSR="${UXNAME}" + +# Do we have enough horsepower on the build system to jack up the resources we throw at building? +# Enabling this will give absolute CPU preference to building the kernels and do make-time +# enhancements/optimizations (i.e. use the maximum number of CPU cores detected). +# I wouldn't enable this unless you have a dedicated build-box that isn't running much else. +I_AM_A_RACECAR="no" + + +# ________________________________________________________________________________________________ +## RECOMMENDED DEFALTS ## +# The following shoult not be changed unless you are ABSOLUTELY, 100% SURE and COMPLETELY POSITIVE +# about what you are doing!!! + +# Legacy support. +ROOTDIR="${BASEDIR}" + +# This used to be defined statically (e.g. CHROOTDIR="${ROOTDIR}/chroot"), +# but is now dynamically appended. Please don't alter this unless you renamed the chroot directory paths. +CHROOTDIR="${BASEDIR}/" +CHROOTDIR32="${CHROOTDIR}root.i686" +CHROOTDIR64="${CHROOTDIR}root.x86_64" + +# This is a directory we use for staging. It definitely should not be checked into git. +# It used to be defined statically (e.g. BUILDDIR="${ROOTDIR}/build"), +# but is now dynamically appended. Please don't alter this unless you renamed the chroot directory paths. +BUILDDIR="${BASEDIR}/build" + +# More staging. +TEMPDIR="${ROOTDIR}/temp" + +# This is where we stage the boot files. +ARCHBOOT="${TEMPDIR}/${DISTNAME}" + +# Lockfile for checking for concurrent/failed builds +LOCKFILE="${ROOTDIR}/lockfile.lck" + + +## VARIABLE PROCESSING ## +# In order to make cleaner code, we need to make sure we can standardize some input. +# Don't even think about touching these unless you know what you're doing. + +# MULTIARCH +if [ -z "${MULTIARCH}" ]; +then + MULTIARCH="y" +fi + +MULTIARCH=${MULTIARCH:0:1} +MULTIARCH=$(echo ${MULTIARCH} | tr [[:upper:]] [[:lower:]]) + +# OPTIMIZATIONS? +if [ -z "${I_AM_A_RACECAR}" ]; +then + I_AM_A_RACECAR="n" +fi + +I_AM_A_RACECAR=${I_AM_A_RACECAR:0:1} +I_AM_A_RACECAR=$(echo ${I_AM_A_RACECAR} | tr [[:upper:]] [[:lower:]]) diff --git a/extra/mirrorlist b/extra/mirrorlist new file mode 100644 index 0000000..6fefe45 --- /dev/null +++ b/extra/mirrorlist @@ -0,0 +1,7 @@ +# Server list generated by rankmirrors on 2014-11-10 +Server = http://mirror.rit.edu/archlinux/$repo/os/$arch +Server = http://mirror.cc.columbia.edu/pub/linux/archlinux/$repo/os/$arch +Server = http://mirrors.acm.wpi.edu/archlinux/$repo/os/$arch +Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch +Server = http://mirror.cs.pitt.edu/archlinux/$repo/os/$arch +Server = http://mirror.vtti.vt.edu/archlinux/$repo/os/$arch diff --git a/extra/packages.32 b/extra/packages.32 new file mode 100644 index 0000000..e69de29 diff --git a/extra/packages.64 b/extra/packages.64 new file mode 100644 index 0000000..e69de29 diff --git a/extra/packages.both b/extra/packages.both new file mode 100644 index 0000000..313c469 --- /dev/null +++ b/extra/packages.both @@ -0,0 +1,104 @@ +# You can include comments, such as this. AUR packages are allowed. +# We need to install all X drivers. +abs +acpidump +arch-install-scripts +archiso +bridge-utils +#cryptcat +customizepkg-scripting +dhclient +dhcpcd +dialog +dmidecode +dnstracer +dnsutils +dos2unix +dosfstools +dropbear +dvd+rw-tools +elinks +ethtool +exfat-utils +findutils +firefox +gnu-netcat +google-chrome-beta +gummiboot +httping +hwdetect +hwinfo +idnkit +ifenslave +iftop +inetutils +ipcalc +iperf +iproute2 +ipsec-tools +iptraf-ng +iputils +irssi +links +localepurge +lshw +lsof +lsscsi +lxde +lynx +macchanger +memtester +mkinitcpio-nfs-utils +mtr-gtk +nbd +net-tools +netctl +netselect +networkmanager +ngrep +nmap-nogui +nmon +ntfs-3g +openssh +openvpn +os-prober +pciutils +pcmciautils +ppp +pptpclient +prebootloader +procinfo-ng +procps-ng +psmisc +pwgen +rfkill +rp-pppoe +rsync +screen +sed +shorewall +socat +strace +syslinux +tcpdump +tcpslice +tcptraceroute +tmux +traceroute +tor +#udpcast +usbip +usbutils +vim-a +vim-bufexplorer +vim-indent-object +vim-minibufexpl +vim-nerdtree +vim-syntastic +vim-workspace +vnstat +vpnc +whois +wxpython +xorg +xorg-drivers diff --git a/extra/pre-build.d/32/etc/pacman.conf b/extra/pre-build.d/32/etc/pacman.conf new file mode 100644 index 0000000..12e3c0e --- /dev/null +++ b/extra/pre-build.d/32/etc/pacman.conf @@ -0,0 +1,94 @@ +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +HoldPkg = pacman glibc +#XferCommand = /usr/bin/curl -C - -f %u > %o +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +#UseDelta = 0.7 +Architecture = i686 + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +UseSyslog +Color +TotalDownload +CheckSpace +VerbosePkgLists + +# By default, pacman accepts packages signed by keys that its local keyring +# trusts (see pacman-key and its man page), as well as unsigned packages. +SigLevel = Required DatabaseOptional +LocalFileSigLevel = Optional +#RemoteFileSigLevel = Required + +# NOTE: You must run `pacman-key --init` before first using pacman; the local +# keyring can then be populated with the keys of all official Arch Linux +# packagers with `pacman-key --populate archlinux`. + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +#[testing] +#Include = /etc/pacman.d/mirrorlist + +[core] +Include = /etc/pacman.d/mirrorlist + +[extra] +Include = /etc/pacman.d/mirrorlist + +#[community-testing] +#Include = /etc/pacman.d/mirrorlist + +[community] +Include = /etc/pacman.d/mirrorlist + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + +[archlinuxfr] +SigLevel = Never +Server = http://repo.archlinux.fr/$arch diff --git a/extra/pre-build.d/64/etc/pacman.conf b/extra/pre-build.d/64/etc/pacman.conf new file mode 100644 index 0000000..277c670 --- /dev/null +++ b/extra/pre-build.d/64/etc/pacman.conf @@ -0,0 +1,103 @@ +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +HoldPkg = pacman glibc +#XferCommand = /usr/bin/curl -C - -f %u > %o +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +#UseDelta = 0.7 +Architecture = x86_64 + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +UseSyslog +Color +TotalDownload +CheckSpace +VerbosePkgLists + +# By default, pacman accepts packages signed by keys that its local keyring +# trusts (see pacman-key and its man page), as well as unsigned packages. +SigLevel = Required DatabaseOptional +LocalFileSigLevel = Optional +#RemoteFileSigLevel = Required + +# NOTE: You must run `pacman-key --init` before first using pacman; the local +# keyring can then be populated with the keys of all official Arch Linux +# packagers with `pacman-key --populate archlinux`. + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +#[testing] +#Include = /etc/pacman.d/mirrorlist + +[core] +Include = /etc/pacman.d/mirrorlist + +[extra] +Include = /etc/pacman.d/mirrorlist + +#[community-testing] +#Include = /etc/pacman.d/mirrorlist + +[community] +Include = /etc/pacman.d/mirrorlist + +# If you want to run 32 bit applications on your x86_64 system, +# enable the multilib repositories as required here. + +#[multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +[multilib] +Include = /etc/pacman.d/mirrorlist + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + +[archlinuxfr] +SigLevel = Never +Server = http://repo.archlinux.fr/$arch diff --git a/extra/pre-build.d/etc/customizepkg.d/linux b/extra/pre-build.d/etc/customizepkg.d/linux new file mode 100755 index 0000000..14cf735 --- /dev/null +++ b/extra/pre-build.d/etc/customizepkg.d/linux @@ -0,0 +1,89 @@ +#!/bin/sh +# change some versions around +sed -i -e 's/^\(pkgbase=linux[[:space:]]*\)/#\1/g' ${1} +sed -i -e 's/^#\(pkgbase=linux-\)custom.*$/\1BDisk/g' ${1} +sed -i -e '/^_kernelname/a KERNVER=$(echo ${pkgver} | sed -e "s/\\\([0-9]\\\.[0-9]*\\\).*$/\\\1/")' ${1} +sed -i -e "s/^\(makedepends=.*\))$/\1 'rsync' 'git')/g" ${1} +##cp linux.preset linux-BDisk.preset +##sed -i -e 's#^[[:space:]]*install\ -D\ -m644\ "${srcdir}/linux.preset".*$#install -D -m644 "${srcdir}/linux-BDisk.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"#g' ${1} +##sed -i -e "s/\ 'fallback'//g" \ +##-e '/^fallback/d' \ +##-e '/^$/d' \ +##-e '/^[[:space:]]*$/d' \ +##-e 's#^\(default_image="/boot/initramfs-linux\).*#\1-BDisk"/g' linux-BDisk.preset +##-e 's/^\(ALL_kver="/boot/vmlinuz-linux\)\(.*\)/\1-BDisk\2/g' linux-BDisk.preset + +# add source for aufs3 +## 12.07.2014 - remove the "git checkout " once a bug is fixed. currently fails with: +## LD fs/aufs/built-in.o +## CC [M] fs/aufs/module.o +##In file included from fs/aufs/module.c:24:0: +##fs/aufs/inode.h:307:12: error: function declaration isn't a prototype +##[-Werror=strict-prototypes] +## AuStubInt0(au_cpup_xattr, h_dst, h_src, ignore_flags) +## ^ +##fs/aufs/aufs.h:28:21: note: in definition of macro 'AuStub' +## static inline type name(__VA_ARGS__) { body; } +## ^ +##fs/aufs/inode.h:307:1: note: in expansion of macro 'AuStubInt0' +## AuStubInt0(au_cpup_xattr, h_dst, h_src, ignore_flags) +## ^ +##cc1: some warnings being treated as errors +##scripts/Makefile.build:257: recipe for target 'fs/aufs/module.o' failed +##make[2]: *** [fs/aufs/module.o] Error 1 +##scripts/Makefile.build:404: recipe for target 'fs/aufs' failed +##make[1]: *** [fs/aufs] Error 2 +##Makefile:929: recipe for target 'fs' failed +##make: *** [fs] Error 2 +sed -i -e '/^prepare()\ {/a\ +\ git clone git:\/\/aufs.git.sourceforge.net\/gitroot\/aufs\/aufs3-standalone.git aufs3 > \/dev\/null 2>&1\ +\ cd aufs3\ +\ git checkout aufs${KERNVER} > \/dev\/null 2>&1\ +\ git checkout c75f6dddc1c58950c76cc1581e4b4c7ac8365bff > \/dev\/null 2>&1\ +\ cd ..\/' ${1} +#sed -i -e 's/^\(_kernelname=\).*$/\1"-BDisk"/' ${1} +sed -i -e '/^[[:space:]]*patch.*pkgver}"$/i rsync -a ../aufs3/Documentation/. Documentation/. ; rsync -a ../aufs3/fs/. fs/. ; cp -a ../aufs3/include/uapi/linux/aufs_type.h include/uapi/linux/. \ +\ for i in $(ls -1 ../aufs3/*.patch) ; do patch -p1 -i ../aufs3/${i} ; done' ${1} +# and we need to be sure to build aufs3-util +#sed -i -e '/^[[:space:]]*install\ -D\ -m644\ vmlinux.*$/a\ +#\ git clone git:\/\/git.code.sf.net\/p\/aufs\/aufs-util > \/dev\/null 2>&1\ +#\ cd aufs-util\ +#\ UTILVER=$(git branch -a | grep -v master | sort -nr | grep -v rcN | head -n1 | cut -f3 -d"\/")\ +#\ git checkout ${UTILVER} > \/dev\/null 2>&1\ +#\ make' ${1} + +# and configure the kernel. this gets messy. +#-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FS\\\).*$/\\\1=m/g" \\\ +sed -i -e '/^[[:space:]]*make\ prepare.*$/i yes "" | make olddefconfig >/dev/null' ${1} +sed -i -e '/^[[:space:]]*make\ prepare.*$/a sed -i \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FS\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_BRANCH_MAX_127\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_SBILIST\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_HNOTIFY\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_HFSNOTIFY\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_EXPORT\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_INO_T_64\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FHSM\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_RDU\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_BDEV_LOOP\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_511\\\).*$/\\\1=n/g" \\\ +-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_1023\\\).*$/\\\1=n/g" \\\ +-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_32767\\\).*$/\\\1=n/g" ${srcdir}/../config{,.x86_64}' ${1} +# yes, we have to do this twice. with a hammer. +sed -i -e '/^[[:space:]]*make\ prepare.*$/a sed -i \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FS\\\).*$/\\\1=m/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_BRANCH_MAX_127\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_SBILIST\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_HNOTIFY\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_HFSNOTIFY\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_EXPORT\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_INO_T_64\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_FHSM\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_RDU\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(CONFIG_AUFS_BDEV_LOOP\\\).*$/\\\1=y/g" \\\ +-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_511\\\).*$/\\\1=n/g" \\\ +-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_1023\\\).*$/\\\1=n/g" \\\ +-e "s/^#[[:space:]]\\\(AUFS_BRANCH_MAX_32767\\\).*$/\\\1=n/g" .config' ${1} +sed -i -e 's/^\([[:space:]]*yes\ ""\ |\ \)make\ config/\1make olddefconfig/' ${1} +# and we have to edit the linux.install as well. +sed -i -e 's/^\(KERNEL_NAME=\).*$/\1-BDisk/g' linux.install* diff --git a/extra/pre-build.d/etc/hostname b/extra/pre-build.d/etc/hostname new file mode 100644 index 0000000..a0047dc --- /dev/null +++ b/extra/pre-build.d/etc/hostname @@ -0,0 +1 @@ +bdisk.square-r00t.net diff --git a/extra/pre-build.d/etc/mkinitcpio.conf b/extra/pre-build.d/etc/mkinitcpio.conf new file mode 100644 index 0000000..a67317a --- /dev/null +++ b/extra/pre-build.d/etc/mkinitcpio.conf @@ -0,0 +1,67 @@ +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES="piix ide_disk reiserfs" +MODULES="aufs ata_generic ata_piix loop nls_cp437 ext4 raid456 vfat netconsole" + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run last, so it may be used to +# override the actual binaries included by a given hook +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES="/usr/bin/memdiskfind" + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +FILES="" + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H ' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS="base" +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS="base udev autodetect block filesystems" +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS="base udev block filesystems" +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS="base udev block mdadm encrypt filesystems" +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS="base udev block lvm2 filesystems" +# +## NOTE: If you have /usr on a separate partition, you MUST include the +# usr, fsck and shutdown hooks. +#HOOKS="base udev autodetect modconf block filesystems keyboard fsck" +#HOOKS="base udev memdisk archiso_shutdown archiso modconf net ssh archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block pcmcia filesystems keyboard livecd" +HOOKS="base udev memdisk archiso_shutdown archiso-custom modconf net ssh archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block pcmcia filesystems keyboard livecd" + +# COMPRESSION +# Use this to compress the initramfs image. By default, gzip compression +# is used. Use 'cat' to create an uncompressed image. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +#COMPRESSION="lzma" +COMPRESSION="xz" +#COMPRESSION="lzop" +#COMPRESSION="lz4" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS="" diff --git a/extra/pre-build.d/etc/pacman.d/mirrorlist b/extra/pre-build.d/etc/pacman.d/mirrorlist new file mode 100644 index 0000000..6fefe45 --- /dev/null +++ b/extra/pre-build.d/etc/pacman.d/mirrorlist @@ -0,0 +1,7 @@ +# Server list generated by rankmirrors on 2014-11-10 +Server = http://mirror.rit.edu/archlinux/$repo/os/$arch +Server = http://mirror.cc.columbia.edu/pub/linux/archlinux/$repo/os/$arch +Server = http://mirrors.acm.wpi.edu/archlinux/$repo/os/$arch +Server = http://mirror.jmu.edu/pub/archlinux/$repo/os/$arch +Server = http://mirror.cs.pitt.edu/archlinux/$repo/os/$arch +Server = http://mirror.vtti.vt.edu/archlinux/$repo/os/$arch diff --git a/extra/pre-build.d/etc/yaourtrc b/extra/pre-build.d/etc/yaourtrc new file mode 100644 index 0000000..e72c70e --- /dev/null +++ b/extra/pre-build.d/etc/yaourtrc @@ -0,0 +1,57 @@ +# yaourtrc - Configuration for yaourt +# +# See yaourtrc(5) for more information +# +# + +# General +#AUTOSAVEBACKUPFILE=0 +#DEVELBUILDDIR="/var/abs/local/yaourtbuild" +#DEVEL=0 +#EDITOR="$EDITOR" +#FORCEENGLISH=0 +#FORCE=0 +#TMPDIR="/tmp" +TMPDIR="/var/tmp" + +# SUDO +#SUDONOVERIF=0 # Avoid multiple sudo checks when timestamp_timeout=0 +#SUDOREDIRECT=1 # Define to 0 in case you use a fingerprint device + +# ABS +# If the package "abs" is installed, those var are parsed from abs.conf +#REPOS=() # REPOS available at $SYNCSERVER +#SYNCSERVER="" + +# AUR +#AURURL="https://aur.archlinux.org" +AURCOMMENT=0 +#AURDEVELONLY=0 +#AURSEARCH=1 +#AURUPGRADE=0 +#AURVOTE=1 + +# Build +#EXPORT=0 # Export to 1: EXPORTDIR or PKGDEST + # 2: pacman cache (as root) +#EXPORTSRC=0 # Need EXPORT>0 to be used +#EXPORTDIR="" # If empty, use makepkg's connfiguration (see makepkg.conf) + +# Prompt +NOCONFIRM=0 +UP_NOCONFIRM=1 +BUILD_NOCONFIRM=1 +PU_NOCONFIRM=1 +EDITFILES=0 +NOENTER=1 + +# Output +USECOLOR=1 +#USEPAGER=0 +DETAILUPGRADE=1 +SHOWORPHANS=1 +TERMINALTITLE=1 + +# Command +#PACMAN="pacman" +#DIFFEDITCMD="vimdiff" diff --git a/extra/pre-build.d/usr/lib/initcpio/hooks/archiso-custom b/extra/pre-build.d/usr/lib/initcpio/hooks/archiso-custom new file mode 100644 index 0000000..8620639 --- /dev/null +++ b/extra/pre-build.d/usr/lib/initcpio/hooks/archiso-custom @@ -0,0 +1,186 @@ +# args: source, newroot, mountpoint +_mnt_fs() { + local img="${1}" + local newroot="${2}" + local mnt="${3}" + local img_fullname="${img##*/}"; + local img_name="${img_fullname%%.*}" + local dm_snap_name="${dm_snap_prefix}_${img_name}" + local ro_dev ro_dev_size rw_dev + + ro_dev=$(losetup --find --show --read-only "${img}") + echo ${ro_dev} >> /run/archiso/used_block_devices + ro_dev_size=$(blockdev --getsz ${ro_dev}) + if [[ "${cowfile_size}" == "100" ]]; then + rw_dev_size=${ro_dev_size} + else + # size calculation done in this way to avoid integer overflow when ro_dev_size is > 10.2G + rw_dev_size=$((ro_dev_size/100*cowfile_size)) + fi + + if [[ "${cow_persistent}" == "P" ]]; then + if [[ -f "/run/archiso/cowspace/${cow_directory}/${img_name}.cow" ]]; then + msg ":: Found '/run/archiso/cowspace/${cow_directory}/${img_name}.cow', using as persistent." + else + msg ":: Creating '/run/archiso/cowspace/${cow_directory}/${img_name}.cow' as persistent." + dd of="/run/archiso/cowspace/${cow_directory}/${img_name}.cow" count=0 seek=${rw_dev_size} &> /dev/null + fi + else + if [[ -f "/run/archiso/cowspace/${cow_directory}/${img_name}.cow" ]]; then + msg ":: Found '/run/archiso/cowspace/${cow_directory}/${img_name}.cow' but non-persistent requested, removing." + rm -f "/run/archiso/cowspace/${cow_directory}/${img_name}.cow" + fi + msg ":: Creating '/run/archiso/cowspace/${cow_directory}/${img_name}.cow' as non-persistent." + dd of="/run/archiso/cowspace/${cow_directory}/${img_name}.cow" count=0 seek=${rw_dev_size} &> /dev/null + fi + + rw_dev=$(losetup --find --show "/run/archiso/cowspace/${cow_directory}/${img_name}.cow") + echo ${rw_dev} >> /run/archiso/used_block_devices + + echo "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} 8" | dmsetup create ${dm_snap_name} + + _mnt_dev "/dev/mapper/${dm_snap_name}" "${newroot}${mnt}" "-w" + echo $(readlink -f /dev/mapper/${dm_snap_name}) >> /run/archiso/used_block_devices +} + +# args: /path/to/image_file, mountpoint +_mnt_sfs() { + local img="${1}" + local mnt="${2}" + local img_fullname="${img##*/}" + local sfs_dev + + if [[ "${copytoram}" == "y" ]]; then + msg -n ":: Copying squashfs image to RAM..." + if ! cp "${img}" "/run/archiso/copytoram/${img_fullname}" ; then + echo "ERROR: while copy '${img}' to '/run/archiso/copytoram/${img_fullname}'" + launch_interactive_shell + fi + img="/run/archiso/copytoram/${img_fullname}" + msg "done." + fi + sfs_dev=$(losetup --find --show --read-only "${img}") + echo ${sfs_dev} >> /run/archiso/used_block_devices + _mnt_dev "${sfs_dev}" "${mnt}" "-r" +} + +# args: device, mountpoint, flags +_mnt_dev() { + local dev="${1}" + local mnt="${2}" + local flg="${3}" + + mkdir -p "${mnt}" + + msg ":: Mounting '${dev}' to '${mnt}'" + + while ! poll_device "${dev}" 30; do + echo "ERROR: '${dev}' device did not show up after 30 seconds..." + echo " Falling back to interactive prompt" + echo " You can try to fix the problem manually, log out when you are finished" + launch_interactive_shell + done + + if mount "${flg}" "${dev}" "${mnt}"; then + msg ":: Device '${dev}' mounted successfully." + else + echo "ERROR; Failed to mount '${dev}'" + echo " Falling back to interactive prompt" + echo " You can try to fix the problem manually, log out when you are finished" + launch_interactive_shell + fi +} + +_verify_checksum() { + local _status + cd "/run/archiso/bootmnt/${archisobasedir}/${arch}" + md5sum -c airootfs.md5 > /tmp/checksum.log 2>&1 + _status=$? + cd "${OLDPWD}" + return ${_status} +} + +run_hook() { + [[ -z "${arch}" ]] && arch="$(uname -m)" + [[ -z "${cowspace_size}" ]] && cowspace_size="75%" + [[ -z "${copytoram_size}" ]] && copytoram_size="75%" + [[ -z "${archisobasedir}" ]] && archisobasedir="arch" + [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="arch" + [[ -z "${archisodevice}" ]] && archisodevice="/dev/disk/by-label/${archisolabel}" + if [[ -z "${cowfile_size}" ]]; then + cowfile_size="100" + else + cowfile_size=${cowfile_size/%} + fi + + if [[ -n "${cow_label}" ]]; then + cow_device="/dev/disk/by-label/${cow_label}" + [[ -z "${cow_persistent}" ]] && cow_persistent="P" + elif [[ -n "${cow_device}" ]]; then + [[ -z "${cow_persistent}" ]] && cow_persistent="P" + else + cow_persistent="N" + fi + + [[ -z "${cow_directory}" ]] && cow_directory="persistent_${archisolabel}/${arch}" + + # set mount handler for archiso + mount_handler="archiso_mount_handler" +} + +# This function is called normally from init script, but it can be called +# as chain from other mount handlers. +# args: /path/to/newroot +archiso_mount_handler() { + local newroot="${1}" + + if ! mountpoint -q "/run/archiso/bootmnt"; then + _mnt_dev "${archisodevice}" "/run/archiso/bootmnt" "-r" + if [[ "${copytoram}" != "y" ]]; then + echo $(readlink -f ${archisodevice}) >> /run/archiso/used_block_devices + fi + fi + + if [[ "${checksum}" == "y" ]]; then + if [[ -f "/run/archiso/bootmnt/${archisobasedir}/${arch}/airootfs.md5" ]]; then + msg -n ":: Self-test requested, please wait..." + if _verify_checksum; then + msg "done. Checksum is OK, continue booting." + else + echo "ERROR: one or more files are corrupted" + echo "see /tmp/checksum.log for details" + launch_interactive_shell + fi + else + echo "ERROR: checksum=y option specified but ${archisobasedir}/${arch}/airootfs.md5 not found" + launch_interactive_shell + fi + fi + + if [[ "${copytoram}" == "y" ]]; then + msg ":: Mounting /run/archiso/copytoram (tmpfs) filesystem, size=${copytoram_size}" + mkdir -p /run/archiso/copytoram + mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram /run/archiso/copytoram + fi + + if [[ -n "${cow_device}" ]]; then + _mnt_dev "${cow_device}" "/run/archiso/cowspace" "-r" + echo $(readlink -f ${cow_device}) >> /run/archiso/used_block_devices + mount -o remount,rw "/run/archiso/cowspace" + else + msg ":: Mounting /run/archiso/cowspace (tmpfs) filesystem, size=${cowspace_size}..." + mkdir -p /run/archiso/cowspace + mount -t tmpfs -o "size=${cowspace_size}",mode=0755 cowspace /run/archiso/cowspace + fi + mkdir -p "/run/archiso/cowspace/${cow_directory}" + + _mnt_sfs "/run/archiso/bootmnt/${archisobasedir}/${arch}/airootfs.sfs" "/run/archiso/sfs/airootfs" + # _mnt_fs "/run/archiso/sfs/airootfs/airootfs.img" "${newroot}" "/" + mount --bind "run/archiso/sfs/airootfs" "/new_root" + + if [[ "${copytoram}" == "y" ]]; then + umount /run/archiso/bootmnt + fi +} + +# vim:ft=sh:ts=4:sw=4:et: diff --git a/extra/pre-build.d/usr/lib/initcpio/hooks/livecd b/extra/pre-build.d/usr/lib/initcpio/hooks/livecd new file mode 100644 index 0000000..ea08dc0 --- /dev/null +++ b/extra/pre-build.d/usr/lib/initcpio/hooks/livecd @@ -0,0 +1,15 @@ +# vim: set ft=sh: + +run_cleanuphook () { + msg ":: Mounting aufs on / with tmpfs=rw, ${root}=ro ..." + modprobe aufs + + echo "Now attempting aufs mount..." + + mkdir /new_root.hw + mount --move /new_root /new_root.hw + mkdir /dev/shm + mount -t tmpfs none /dev/shm + mount -t aufs none /new_root -o dirs=/dev/shm=rw:/new_root.hw=ro -o noatime + pkill -9 dropbear #kill SSH (in preparation for the live system starting ssh on port 22 +} diff --git a/extra/pre-build.d/usr/lib/initcpio/hooks/ssh b/extra/pre-build.d/usr/lib/initcpio/hooks/ssh new file mode 100644 index 0000000..2595634 --- /dev/null +++ b/extra/pre-build.d/usr/lib/initcpio/hooks/ssh @@ -0,0 +1,67 @@ +#!/usr/bin/ash + +run_hook () +{ + local line i address netmask gateway dns0 dns1 rootserver rootpath defaultrootpath defaultserver + + : > /ip_opts + + if [ -z "${ip}" -a -n "${nfsaddrs}" ]; then + ip="${nfsaddrs}" + fi + + if [ -n "${ip}" ]; then + # setup network and save some values + ipconfig "ip=${ip}" | while read line; do + if [ "${line#"IP-Config:"}" != "${line}" ]; then + continue + fi + + line="$(echo ${line} | sed -e 's/ :/:/g;s/: /=/g')" + + for i in ${line}; do + case "${i}" in + address=*) + echo "${i}" >> /ip_opts + ;; + netmask=*) + echo "${i}" >> /ip_opts + ;; + gateway=*) + echo "${i}" >> /ip_opts + ;; + dns0=*) + echo "${i}" >> /ip_opts + ;; + dns1=*) + echo "${i}" >> /ip_opts + ;; + rootserver=*) + echo "${i}" >> /ip_opts + ;; + rootpath=*) + echo "${i}" >> /ip_opts + ;; + esac + done + done + + echo "device=$(echo ${ip} | cut -d: -f6)" >> /ip_opts + fi + + . /ip_opts + + echo "IP-Config: ${address}/${netmask}" + echo "IP-Config: gw: ${gateway} dns0: ${dns0} dns1: ${dns1}" + + [ -d /dev/pts ] || mkdir -p /dev/pts + mount -t devpts devpts /dev/pts + + echo "Starting dropbear" + /usr/sbin/dropbear -E +} + +run_cleanuphook () +{ + pkill -9 dropbear +} diff --git a/extra/pre-build.d/usr/lib/initcpio/install/archiso-custom b/extra/pre-build.d/usr/lib/initcpio/install/archiso-custom new file mode 100644 index 0000000..e506271 --- /dev/null +++ b/extra/pre-build.d/usr/lib/initcpio/install/archiso-custom @@ -0,0 +1,23 @@ +#!/bin/bash + +build() { + add_module "cdrom" + add_module "loop" + add_module "dm-snapshot" + + add_runscript + + add_binary /usr/lib/udev/cdrom_id + add_binary blockdev + add_binary dmsetup + add_binary losetup + add_binary mountpoint + add_binary truncate + + add_file /usr/lib/udev/rules.d/60-cdrom_id.rules + add_file /usr/lib/udev/rules.d/10-dm.rules + add_file /usr/lib/udev/rules.d/95-dm-notify.rules + add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules +} + +# vim: set ft=sh ts=4 sw=4 et: diff --git a/extra/pre-build.d/usr/lib/initcpio/install/livecd b/extra/pre-build.d/usr/lib/initcpio/install/livecd new file mode 100644 index 0000000..248e827 --- /dev/null +++ b/extra/pre-build.d/usr/lib/initcpio/install/livecd @@ -0,0 +1,21 @@ +#!/bin/bash + +build() +{ + add_module 'squashfs' + add_module 'loop' + add_module 'aufs' + + add_binary "sed" + add_binary "pkill" + + add_runscript + +} + +help() +{ + cat < "${TMPDIR}"/passwd +} + +build () +{ + # + # Begin real processing + # + + # Are we even needed? + if [ ! -e "/etc/dropbear/root_key" ]; then + echo "There is no root key in /etc/dropbear/root_key existent; exit" + return 0 + fi + + # if TMPDIR is set leave it alone otherwise set + [ -z $TMPDIR ] && TMPDIR='/tmp/dropbear_initrd_encrypt' + + # check if TMPDIR exsists if not make it + [ -d $TMPDIR ] || mkdir -p $TMPDIR + + umask 0022 + + [ -d /etc/dropbear ] && mkdir -p /etc/dropbear + + display_fingerprints || copy_openssh_keys || generate_keys + + [ -e "${TMPDIR}/passwd" ] && ( grep -q -e '^root:' "${TMPDIR}/passwd" ) || make_etc_passwd + + add_checked_modules "/drivers/net/" + add_binary "rm" + add_binary "dropbear" + add_binary "killall" + + echo '/bin/ash' > "${TMPDIR}"/shells + add_file "${TMPDIR}/shells" "/etc/shells" + + cat /etc/dropbear/root_key > "${TMPDIR}"/authorized_keys + + add_dir "/.ssh" + add_file "${TMPDIR}/authorized_keys" "/.ssh/authorized_keys" + add_file "${TMPDIR}/passwd" "/etc/passwd" + add_dir "/etc/dropbear" + add_file "/etc/dropbear/dropbear_rsa_host_key" + add_file "/etc/dropbear/dropbear_dss_host_key" + add_file "/lib/libnss_files.so.2" + add_binary "ip" "/sbin/ip" + add_dir "/var/run" + + touch "${TMPDIR}"/lastlog + add_dir "/var/log" + add_file "${TMPDIR}/lastlog" "/var/log/lastlog" + add_binary "/usr/lib/initcpio/ipconfig" "/bin/ipconfig" + + # cleanup + rm "${TMPDIR}/shells" + rm "${TMPDIR}/authorized_keys" + rm "${TMPDIR}/passwd" + rm "${TMPDIR}/lastlog" + + add_runscript + +} + +help () +{ + cat< ../../../usr/local/pacman.db.tar.xz + cd ${_CURDIR} + + # sync over new changes and trim out the fat + rsync -a --delete ${CHROOTDIR}/. ${BUILDDIR}/. + set +e + cp -af ${BUILDDIR}/usr/share/zoneinfo/EST5EDT ${BUILDDIR}/etc/localtime + cp -af ${CHROOTDIR}/usr/share/zoneinfo/EST5EDT ${CHROOTDIR}/etc/localtime + set -e + cp -af ${BUILDDIR}/usr/share/locale/locale.alias ${BUILDDIR}/tmp/. + echo "Cleaning up unnecessary cruft in ${BUILDDIR}..." + + rm -f ${BUILDDIR}/root/.bash_history + rm -f ${BUILDDIR}/root/.viminfo + #rm -f ${BUILDDIR}/etc/localtime + rm -f ${BUILDDIR}/root/.bashrc + # DISABLE when no longer building custom kernel + find ${BUILDDIR}/usr/lib/modules/ -maxdepth 1 -iname "*-ARCH" -exec rm -rf '{}' \; + rm -rf ${BUILDDIR}/usr/share/locale/* + mv -f ${BUILDDIR}/tmp/locale.alias ${BUILDDIR}/usr/share/locale/. + rm -rf ${BUILDDIR}/var/cache/pacman/* + rm -rf ${BUILDDIR}/var/cache/pkgfile/* + rm -rf ${BUILDDIR}/var/lib/pacman/* + mkdir -p ${BUILDDIR}/var/lib/pacman/local + rm -rf ${BUILDDIR}/var/abs/local/yaourtbuild/* + rm -rf ${BUILDDIR}/usr/share/zoneinfo + rm -rf ${BUILDDIR}/tmp/* + rm -rf ${BUILDDIR}/var/tmp/* + rm -rf ${BUILDDIR}/var/abs/* + rm -rf ${BUILDDIR}/run/* + rm -rf ${BUILDDIR}/boot/* + rm -rf ${BUILDDIR}/usr/src/* + rm -rf ${BUILDDIR}/var/log/* + rm -rf ${BUILDDIR}/.git + CHROOTDIR="${CHROOTDIR_GLOB}" + BUILDDIR="${BUILDDIR_GLOB}" +} + diff --git a/lib/06-centos_is_stupid.func.sh b/lib/06-centos_is_stupid.func.sh new file mode 100644 index 0000000..ab7b9a7 --- /dev/null +++ b/lib/06-centos_is_stupid.func.sh @@ -0,0 +1,70 @@ +function centos_is_stupid { + echo "Checking for appropriate kernel version and mksquashfs version..." + SQFS_VER=$(mksquashfs -version 2>&1 | head -n1 | awk '{print $3}' | sed -re 's/(^[0-9]*\.[0-9]*).*$/\1/g') + KERN_VER=$(uname -r | cut -f1 -d"-") + SQUASH_OPTS="-noappend -comp xz" + + set +e + ver_check() { + [ "$1" == "$2" ] && return 10 + ver1front=`echo $1 | cut -d "." -f -1` + ver1back=`echo $1 | cut -d "." -f 2-` + ver2front=`echo $2 | cut -d "." -f -1` + ver2back=`echo $2 | cut -d "." -f 2-` + if [ "$ver1front" != "$1" ] || [ "$ver2front" != "$2" ]; then + [ "$ver1front" -gt "$ver2front" ] && return 11 + [ "$ver1front" -lt "$ver2front" ] && return 9 + [ "$ver1front" == "$1" ] || [ -z "$ver1back" ] && ver1back=0 + [ "$ver2front" == "$2" ] || [ -z "$ver2back" ] && ver2back=0 + ver_check "$ver1back" "$ver2back" + return $? + else + [ "$1" -gt "$2" ] && return 11 || return 9 + fi + } + ver_check ${KERN_VER} "2.6.38" + KERNTEST=${?} + ver_check ${SQFS_VER} "4.2" + SQFSTEST=${?} + if [ ${KERNTEST} -lt "10" ]; + then + echo "You need a newer kernel to even think about doing this. (>= 2.6.38)" + echo "If you're on CentOS, there are 3.x branches available via the elrepo repository." + echo "I recommend the 'kernel-lt' package from there." + echo "Bailing out." + exit 1 + #elif [ ${SQFS_VER} -ge "4.2" ] && [ ${KERN_VER} -ge "2.6.38" ]; + elif [ ${SQFSTEST} -ge "10" ] && [ ${KERNTEST} -ge "10" ]; + then + #echo "Awesome; your mksquashfs (if found) is not less than v4.2." + SQUASH_CMD=$(which mksquashfs) + if [ ${?} != "0" ]; + then + echo "...Except you need to install whatever package you need to for mksquashfs." + exit 1 + else + SQUASH_CMD=$(which mksquashfs) + fi + elif [ ${SQFSTEST} -lt "10" ] && [ ${KERNTEST} -ge "10" ]; + then + if [ ! -f ${SRCDIR}/squashfs4.2/squashfs-tools/mksquashfs ]; + then + echo "Boy howdy. We need to compile a custom version of the squashfs-tools because you aren't running a version that supports XZ. Give me a second." + set -e + mkdir -p ${SRCDIR} ${ROOTDIR}/bin + cd ${SRCDIR} + #wget --quiet -O squashfs4.2.tar.gz "http://downloads.sourceforge.net/project/squashfs/squashfs/squashfs4.2/squashfs4.2.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fsquashfs%2Ffiles%2F&ts=1387047818&use_mirror=hivelocity" + curl -o squashfs4.2.tar.gz "http://downloads.sourceforge.net/project/squashfs/squashfs/squashfs4.2/squashfs4.2.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fsquashfs%2Ffiles%2F&ts=1387047818&use_mirror=hivelocity" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + tar -zxf squashfs4.2.tar.gz + cd squashfs4.2/squashfs-tools + make clean + sed -i -e 's/^#\(XZ_SUPPORT\)/\1/g' Makefile + make + SQUASH_CMD="${SRCDIR}/squashfs4.2/squashfs-tools/mksquashfs" + else + echo "Using custom-compiled mksquashfs from an earlier run." + SQUASH_CMD="${SRCDIR}/squashfs4.2/squashfs-tools/mksquashfs" + fi + fi + set -e +} diff --git a/lib/07-will_it_blend.func.sh b/lib/07-will_it_blend.func.sh new file mode 100644 index 0000000..c0d893f --- /dev/null +++ b/lib/07-will_it_blend.func.sh @@ -0,0 +1,77 @@ +function will_it_blend () { + local ARCHSUFFIX="${1}" + if [[ "${1}" == "64" ]]; + then + local CHROOTDIR="${CHROOTDIR}root.x86_64" + local BUILDDIR="${BUILDDIR}64" + local AIROOT="x86_64" + _CHROOT=${CHROOTDIR} + _BUILD=${BUILDDIR} + _AIROOT=${AIROOT} + elif [[ "${1}" == "32" ]]; + then + local CHROOTDIR="${CHROOTDIR}root.i686" + local BUILDDIR="${BUILDDIR}32" + local AIROOT="i686" + _CHROOT=${CHROOTDIR} + _BUILD=${BUILDDIR} + _AIROOT=${AIROOT} + else + echo "WHOOPS. We hit an error that makes no logical sense." + echo 'Dying.' + exit 1 + fi + + if [[ "${I_AM_A_RACECAR}" == "y" ]]; + then + RACECAR_CHK='nice -n "-19" ' + else + RACECAR_CHK="" + fi + + if [ "${CHROOTDIR}/root/.bash_history" -nt "${ARCHBOOT}/${AIROOT}/airootfs.sfs" ] || [ ! -d "${BUILDDIR}/root/" ]; + then + echo "Data is not sync'd to buildroot; syncing..." + CHROOTDIR="${CHROOTDIR_GLOB}" + BUILDDIR="${BUILDDIR_GLOB}" + jenny_craig ${ARCHSUFFIX} + CHROOTDIR="${_CHROOT}" + BUILDDIR="${_BUILD}" + fi + echo "[${ARCHSUFFIX}-bit] Now generating the squashed image (if we need to) and hashes. This may take some time." + BUILDDIR="${BUILDDIR_GLOB}" + local BUILDDIR="${BUILDDIR}${ARCHSUFFIX}" + + # now let's build the squashed image... and generate some checksums as well to verify download integrity. + mkdir -p ${ARCHBOOT}/${AIROOT} + + if [ ! -f "${ARCHBOOT}/${AIROOT}/airootfs.sfs" ] || [ "${CHROOTDIR}/root/.bash_history" -nt "${ARCHBOOT}/${AIROOT}/airootfs.sfs" ]; + then + echo "[${ARCHSUFFIX}-bit] Squashing filesystem. This can take a while depending on the size of your chroot(s)." + ${RACECAR_CHK}${SQUASH_CMD} ${BUILDDIR} ${ARCHBOOT}/${AIROOT}/airootfs.sfs ${SQUASH_OPTS} >> "${LOGFILE}.${FUNCNAME}" 2>&1 + cd ${ARCHBOOT}/${AIROOT} + ${RACECAR_CHK}sha256sum airootfs.sfs >> airootfs.sha256 + ${RACECAR_CHK}md5sum airootfs.sfs >> airootfs.md5 + cd ${ROOTDIR} + else + cd ${ROOTDIR} + fi + + # Generate the mtree spec. + # Not really necessary anymore. + #mtree -c -p ${ROOTDIR}/chroot -K flags,gid,mode,nlink,uid,link,time,type > ${ROOTDIR}/extra/mtree.spec + + # and now we copy stuff into the live directories + echo "[${ARCHSUFFIX}-bit] Copying files for PXE, and ISO building, please be patient." + #rm -rf ${TEMPDIR}/* + cp -af ${BASEDIR}/extra/${UXNAME}.png ${TEMPDIR}/. + cp -af ${BASEDIR}/extra/${UXNAME}.png ${TFTPDIR}/. + mkdir -p ${TEMPDIR}/boot + cp -af ${CHROOTDIR}/boot/initramfs-linux-${PNAME}.img ${TEMPDIR}/boot/${UXNAME}.${ARCHSUFFIX}.img + cp -af ${CHROOTDIR}/boot/vmlinuz-linux-${PNAME} ${TEMPDIR}/boot/${UXNAME}.${ARCHSUFFIX}.kern + cp -af ${CHROOTDIR}/boot/initramfs-linux-${PNAME}.img ${TFTPDIR}/${UXNAME}.${ARCHSUFFIX}.img + cp -af ${CHROOTDIR}/boot/vmlinuz-linux-${PNAME} ${TFTPDIR}/${UXNAME}.${ARCHSUFFIX}.kern + cp -af ${ARCHBOOT}/* ${HTTPDIR}/${DISTNAME}/. + chown -R ${HTTPUSR}:${HTTPGRP} ${HTTPDIR} + chown ${TFTPUSR}:${TFTPGRP} ${TFTPDIR}/${UXNAME}.* +} diff --git a/lib/08-stuffy.func.sh b/lib/08-stuffy.func.sh new file mode 100644 index 0000000..ff33b43 --- /dev/null +++ b/lib/08-stuffy.func.sh @@ -0,0 +1,106 @@ +function stuffy { + + cp -f ${BASEDIR}/VERSION_INFO.txt ${TEMPDIR}/. + + if [[ "${I_AM_A_RACECAR}" == "y" ]]; + then + RACECAR_CHK='nice -n "-19" ' + else + RACECAR_CHK="" + fi + + echo "Setting up EFI stuff..." + + mkdir -p ${TEMPDIR}/{EFI/{${DISTNAME},boot},loader/entries} + # this stuff comes from the prebootloader pkg and gummiboot pkg. lets us boot on UEFI machines with secureboot still enabled. + cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi ${TEMPDIR}/EFI/boot/bootx64.efi + cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/HashTool.efi ${TEMPDIR}/EFI/boot/. + cp ${BASEDIR}/root.x86_64/usr/lib/gummiboot/gummibootx64.efi ${TEMPDIR}/EFI/boot/loader.efi # TODO: can i use syslinux.efi instead? + + echo "Checking/fetching UEFI shells..." + if [ ! -f "${TEMPDIR}/EFI/shellx64_v2.efi" ]; + then + # EFI Shell 2.0 for UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=UEFI_Shell ) + curl -o ${TEMPDIR}/EFI/shellx64_v2.efi https://svn.code.sf.net/p/edk2/code/trunk/edk2/ShellBinPkg/UefiShell/X64/Shell.efi >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + if [ ! -f "${TEMPDIR}/EFI/shellx64_v1.efi" ]; + then + # EFI Shell 1.0 for non UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Efi-shell ) + curl -o ${TEMPDIR}/EFI/shellx64_v1.efi https://svn.code.sf.net/p/edk2/code/trunk/edk2/EdkShellBinPkg/FullShell/X64/Shell_Full.efi >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + + # now for setting up loader config/entries. maybe add memtest or something in the future? i dunno. + cat > ${TEMPDIR}/loader/loader.conf << EOF +timeout 3 +default ${UXNAME}_ram +EOF + cat > ${TEMPDIR}/loader/entries/${UXNAME}_ram.conf << EOF +title ${PNAME} +linux /boot/${UXNAME}.kern +initrd /boot/${UXNAME}.img +options copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME} +EOF + cat > ${TEMPDIR}/loader/entries/${UXNAME}.conf << EOF +title ${PNAME} (Run from media) +linux /boot/${UXNAME}.kern +initrd /boot/${UXNAME}.img +options archisobasedir=${DISTNAME} archisolabel=${DISTNAME} +EOF + cat > ${TEMPDIR}/loader/entries/uefi2.conf << EOF +title UEFI Shell (v2) +efi /EFI/shellx64_v2.efi +EOF + cat > ${TEMPDIR}/loader/entries/uefi1.conf << EOF +title UEFI Shell (v1) +efi /EFI/shellx64_v1.efi +EOF + + + # create the embedded efiboot FAT stuff + # how big should we make the disk? + echo "Generating the EFI embedded FAT filesystem..." + FTSIZE=$(du -sc ${TEMPDIR}/{boot,EFI,loader} | tail -n1 | awk '{print $1}') + FATSIZE=$((${FTSIZE} + 64)) # let's give a little wiggle room + ${RACECAR_CHK}truncate -s "${FATSIZE}"K ${TEMPDIR}/EFI/${DISTNAME}/efiboot.img + ${RACECAR_CHK}mkfs.vfat -n ${DISTNAME}_EFI ${TEMPDIR}/EFI/${DISTNAME}/efiboot.img >> "${LOGFILE}.${FUNCNAME}" 2>&1 + mkdir -p ${SRCDIR}/efiboot + mount ${TEMPDIR}/EFI/${DISTNAME}/efiboot.img ${SRCDIR}/efiboot + mkdir -p ${SRCDIR}/efiboot/EFI/${DISTNAME} + cp ${TEMPDIR}/boot/${UXNAME}.64.kern ${SRCDIR}/efiboot/EFI/${DISTNAME}/${UXNAME}.efi + cp ${TEMPDIR}/boot/${UXNAME}.64.img ${SRCDIR}/efiboot/EFI/${DISTNAME}/${UXNAME}.img + mkdir -p ${SRCDIR}/efiboot/{EFI/boot,loader/entries} + # GETTING DEJA VU HERE. + cat > ${SRCDIR}/efiboot/loader/loader.conf << EOF +timeout 3 +default ${UXNAME}_ram +EOF + cat > ${SRCDIR}/efiboot/loader/entries/${UXNAME}_ram.conf << EOF +title ${PNAME} +linux /EFI/${DISTNAME}/${UXNAME}.efi +initrd /EFI/${DISTNAME}/${UXNAME}.img +options copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME} +EOF + cat > ${SRCDIR}/efiboot/loader/entries/${UXNAME}.conf << EOF +title ${PNAME} (Run from media) +linux /EFI/${DISTNAME}/${UXNAME}.efi +initrd /EFI/${DISTNAME}/${UXNAME}.img +options archisobasedir=${DISTNAME} archisolabel=${DISTNAME} +EOF + cat > ${SRCDIR}/efiboot/loader/entries/uefi2.conf << EOF +title UEFI Shell (v2) +efi /EFI/shellx64_v2.efi +EOF + cat > ${SRCDIR}/efiboot/loader/entries/uefi1.conf << EOF +title UEFI Shell (v1) +efi /EFI/shellx64_v1.efi +EOF + + cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/PreLoader.efi ${SRCDIR}/efiboot/EFI/boot/bootx64.efi + cp ${BASEDIR}/root.x86_64/usr/lib/prebootloader/HashTool.efi ${SRCDIR}/efiboot/EFI/boot/. + cp ${BASEDIR}/root.x86_64/usr/lib/gummiboot/gummibootx64.efi ${SRCDIR}/efiboot/EFI/boot/loader.efi # TODO: can i use syslinux.efi instead? + cp ${TEMPDIR}/EFI/shellx64_v* ${SRCDIR}/efiboot/EFI/. + umount ${SRCDIR}/efiboot + echo "EFI configuration complete..." + +} + diff --git a/lib/09-yo_dj.func.sh b/lib/09-yo_dj.func.sh new file mode 100644 index 0000000..0295ba6 --- /dev/null +++ b/lib/09-yo_dj.func.sh @@ -0,0 +1,296 @@ +function yo_dj () { + ARCH="${1}" + echo "Building the actual .iso image. This may take a while." + im_batman + ISOFILENAME="${UXNAME}-${VERSION}.iso" + if [[ "${MULTIARCH}" == "y" ]]; + then + ISOFILENAME="${UXNAME}-${VERSION}-any.iso" + else + ISOFILENAME="${UXNAME}-${VERSION}-${ARCH}.iso" + fi + + if [[ "${I_AM_A_RACECAR}" == "y" ]]; + then + RACECAR_CHK='nice -n "-19" ' + else + RACECAR_CHK="" + fi + + # and why not? generate the ISO. + ## we need to generate the isolinux.cfg + mkdir -p ${TEMPDIR}/isolinux + if [[ "${MULTIARCH}" == "y" ]]; + then + ## MULTIARCH ISO + cat > ${TEMPDIR}/isolinux/isolinux.cfg << EOF +UI vesamenu.c32 +DEFAULT check +PROMPT 0 +TIMEOUT 50 +MENU HIDDEN +#ONTIMEOUT ${UXNAME}_ram +ONTIMEOUT check +MENU TABMSG Press [TAB] to edit options +#MENU TITLE ${PNAME} (ISO edition) +MENU ROWS 16 +MENU TIMEOUTROW 22 +MENU TABMSGROW 24 +MENU CMDLINEROW 24 +MENU HELPMSGROW 26 +MENU WIDTH 78 +MENU MARGIN 6 +MENU IMMEDIATE +# http://www.colorpicker.com/ +MENU color border 0 #00000000 #00000000 none +MENU color title 0 #FFF5B800 #00000000 std +MENU color sel 7;37;40 #FF000000 #FFFFFFFF all +MENU color hotsel 1;7;37;40 #FFFF0000 #FFC0C0C0 all +MENU color hotkey 1;7;37;40 #FF0000CC #FFC0C0C0 all +MENU color tabmsg 1;31;40 #FF808080 #00000000 std +MENU color help 1;31;40 #FFFFFFFF #FF000000 none +MENU color timeout_msg 0 #FFFFB300 #00000000 none +MENU color timeout 0 #FFFF0000 #FF000000 none +MENU color cmdline 0 #FFFFFFFF #FF000000 none +MENU color cmdmark 1;36;40 #C000FFFF #FF000000 std +MENU color scrollbar 30;44 #FF00FF00 #FF000000 std +MENU color msg07 0 #FF000000 #00FFFFFF none +MENU BACKGROUND /${UXNAME}.png + +LABEL check + MENU LABEL Your best supported kernel should be detected automatically. + COM32 ifcpu64.c32 + APPEND ${UXNAME}_ram_64 -- ${UXNAME}_ram_32 + MENU DEFAULT + + + +LABEL local_override + MENU LABEL Local ^Boot + localboot 0 + TEXT HELP + Boot from the local system instead. + ENDTEXT + +LABEL reboot + MENU LABEL ^Reboot + COM32 reboot.c32 + TEXT HELP + Reboot the machine + ENDTEXT + +MENU SEPARATOR + +## 64 BIT +MENU BEGIN 64BIT +MENU LABEL ^1) 64-Bit ... +ONTIMEOUT ${UXNAME}_ram_64 + +LABEL ${UXNAME}_ram_64 + MENU LABEL ^1) ${PNAME} (run from RAM) (Default) + LINUX /boot/${UXNAME}.64.kern + INITRD /boot/${UXNAME}.64.img + APPEND copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME} + TEXT HELP + 64-bit, run from RAM + ENDTEXT + MENU DEFAULT + +LABEL ${UXNAME}_64 + MENU LABEL ^1) ${PNAME} + LINUX /boot/${UXNAME}.64.kern + INITRD /boot/${UXNAME}.64.img + APPEND archisobasedir=${DISTNAME} archisolabel=${DISTNAME} + TEXT HELP + Same as the above, except run directly from the CD- + don't copy the image to RAM. (Best for lower-memory boxes) + ENDTEXT + +MENU END + +MENU BEGIN 32BIT +MENU LABEL ^2) 32-Bit ... +ONTIMEOUT ${UXNAME}_ram_32 + +## 32 BIT +LABEL ${UXNAME}_ram_32 + MENU LABEL ^1) ${PNAME} (run from RAM) (Default) + LINUX /boot/${UXNAME}.32.kern + INITRD /boot/${UXNAME}.32.img + APPEND copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME} + TEXT HELP + 32-bit, run from RAM + ENDTEXT + MENU DEFAULT + +LABEL ${UXNAME}_32 + MENU LABEL ^2) ${PNAME} + LINUX /boot/${UXNAME}.32.kern + INITRD /boot/${UXNAME}.32.img + APPEND archisobasedir=${DISTNAME} archisolabel=${DISTNAME} + TEXT HELP + Same as the above, except run directly from the CD- + don't copy the image to RAM. (Best for lower-memory boxes) + ENDTEXT + +MENU END +EOF + else + ## ARCH-SPECIFIC ISO + cat > ${TEMPDIR}/isolinux/isolinux.cfg << EOF +UI vesamenu.c32 +DEFAULT check +PROMPT 0 +TIMEOUT 50 +MENU HIDDEN +ONTIMEOUT ${UXNAME}_ram_${ARCH} +MENU TABMSG Press [TAB] to edit options +#MENU TITLE ${PNAME} (ISO edition) +MENU ROWS 16 +MENU TIMEOUTROW 22 +MENU TABMSGROW 24 +MENU CMDLINEROW 24 +MENU HELPMSGROW 26 +MENU WIDTH 78 +MENU MARGIN 6 +MENU IMMEDIATE +# http://www.colorpicker.com/ +MENU color border 0 #00000000 #00000000 none +MENU color title 0 #FFF5B800 #00000000 std +MENU color sel 7;37;40 #FF000000 #FFFFFFFF all +MENU color hotsel 1;7;37;40 #FFFF0000 #FFC0C0C0 all +MENU color hotkey 1;7;37;40 #FF0000CC #FFC0C0C0 all +MENU color tabmsg 1;31;40 #FF808080 #00000000 std +MENU color help 1;31;40 #FFFFFFFF #FF000000 none +MENU color timeout_msg 0 #FFFFB300 #00000000 none +MENU color timeout 0 #FFFF0000 #FF000000 none +MENU color cmdline 0 #FFFFFFFF #FF000000 none +MENU color cmdmark 1;36;40 #C000FFFF #FF000000 std +MENU color scrollbar 30;44 #FF00FF00 #FF000000 std +MENU color msg07 0 #FF000000 #00FFFFFF none +MENU BACKGROUND /${UXNAME}.png + +LABEL local_override + MENU LABEL Local ^Boot + localboot 0 + TEXT HELP + Boot from the local system instead. + ENDTEXT + +LABEL reboot + MENU LABEL ^Reboot + COM32 reboot.c32 + TEXT HELP + Reboot the machine + ENDTEXT + +MENU SEPARATOR + +MENU BEGIN ${ARCH}BIT +MENU LABEL ^1) ${ARCH}-Bit ... +ONTIMEOUT ${UXNAME}_ram_${ARCH} + +LABEL ${UXNAME}_ram_${ARCH} + MENU LABEL ^1) ${PNAME} (run from RAM) (Default) + LINUX /boot/${UXNAME}.${ARCH}.kern + INITRD /boot/${UXNAME}.${ARCH}.img + APPEND copytoram archisobasedir=${DISTNAME} archisolabel=${DISTNAME} + TEXT HELP + ${ARCH}-bit, run from RAM + ENDTEXT + MENU DEFAULT + +LABEL ${UXNAME}_${ARCH} + MENU LABEL ^1) ${PNAME} + LINUX /boot/${UXNAME}.${ARCH}.kern + INITRD /boot/${UXNAME}.${ARCH}.img + APPEND archisobasedir=${DISTNAME} archisolabel=${DISTNAME} + TEXT HELP + Same as the above, except run directly from the CD- + don't copy the image to RAM. (Best for lower-memory boxes) + ENDTEXT + +MENU END +EOF + fi + + stuffy + + rm -f ${ISOFILENAME} + if [ "${ARCHBOOT}" != "${TEMPDIR}/${DISTNAME}" ]; + then + mkdir -p ${TEMPDIR}/${DISTNAME} + rsync -a --delete ${ARCHBOOT}/. ${TEMPDIR}/${DISTNAME}/. + fi + cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/isolinux.bin ${TEMPDIR}/isolinux + #cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/isolinux-debug.bin ${TEMPDIR}/isolinux/isolinux.bin #debugging + #cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/* ${TEMPDIR}/isolinux/. #debugging + cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/vesamenu.c32 ${TEMPDIR}/isolinux + cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/linux.c32 ${TEMPDIR}/isolinux + cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/reboot.c32 ${TEMPDIR}/isolinux + if [ -f ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/ldlinux.c32 ]; + then + cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/ldlinux.c32 ${TEMPDIR}/isolinux + fi + if [ -f ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/libcom32.c32 ]; + then + cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/libcom32.c32 ${TEMPDIR}/isolinux + fi + if [ -f ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/libutil.c32 ]; + then + cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/libutil.c32 ${TEMPDIR}/isolinux + fi + if [ -f ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/ifcpu64.c32 ]; + then + cp -af ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/ifcpu64.c32 ${TEMPDIR}/isolinux + fi + cd ${TEMPDIR} + + cd .. + ${RACECAR_CHK}xorriso -as mkisofs \ +-quiet \ +`#-joliet` \ +`#-rock` \ +`#-omit-version-number` \ +`#-disable-deep-relocation` \ +-iso-level 3 \ +-full-iso9660-filenames \ +-volid "${DISTNAME}" \ +-appid "${DISTDESC}" \ +-publisher "${DISTPUB}" \ +`#-preparer "prepared by ${0}"` \ +-preparer "prepared by ${DISTPUB}" \ +-eltorito-boot isolinux/isolinux.bin \ +-eltorito-catalog isolinux/boot.cat \ +`#-isohybrid-mbr ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/isohdpfx.bin` \ +-no-emul-boot \ +-boot-load-size 4 \ +-boot-info-table \ +-isohybrid-mbr ${BASEDIR}/root.x86_64/usr/lib/syslinux/bios/isohdpfx.bin \ +-eltorito-alt-boot \ +-e EFI/${DISTNAME}/efiboot.img \ +-no-emul-boot \ +`#--efi-boot EFI/${DISTNAME}/efiboot.img` \ +-isohybrid-gpt-basdat \ +-output "${ISODIR}/${ISOFILENAME}" "${TEMPDIR}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + + + #isohybrid ${ISOFILENAME} + cd ${ISODIR} + ${RACECAR_CHK}sha256sum ${ISOFILENAME} > ${ISOFILENAME}.sha256 + cd .. + echo "ISO generated; size is $(ls -lh ${ISODIR}/${ISOFILENAME} | awk '{print $5}')." + echo "SHA256 sum is: $(awk '{print $1}' ${ISODIR}/${ISOFILENAME}.sha256)" + echo "You can find it at ${ISODIR}/${ISOFILENAME}" + #rm -rf ${TEMPDIR}/* + + # are we rsyncing? + if [ -n "${RSYNC_HOST}" ]; + then + rsync -a ${TFTPDIR}/. ${RSYNC_HOST}:${RSYNC_DEST}/tftpboot/. + rsync -a ${HTTPDIR}/. ${RSYNC_HOST}:${RSYNC_DEST}/http/. +# rsync -a ${TEMPDIR}/boot/${UXNAME}.* ${RSYNC_HOST}:${RSYNC_DEST}/http/. + rsync -a ${ISODIR}/. ${RSYNC_HOST}:${RSYNC_DEST}/iso/. + rsync -a ${ROOTDIR}/extra/. ${RSYNC_HOST}:${RSYNC_DEST}/extra/. + fi +} diff --git a/lib/10-mentos.func.sh b/lib/10-mentos.func.sh new file mode 100644 index 0000000..f5f47b5 --- /dev/null +++ b/lib/10-mentos.func.sh @@ -0,0 +1,104 @@ +function mentos { + # Freshen up the chroots to git's HEAD. Package lists, overlay, etc. + sed -i -e '/base-devel/d ; /multilib-devel/d' ${BASEDIR}/extra/packages.* + # both + echo "Installing common packages..." + PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.both | tr '\n' ' ') + + if [ -f "/usr/bin/systemd-nspawn" ]; + then + CHROOTCMD="systemd-nspawn -D" + else + CHROOTCMD="${CHROOTDIR64}/bin/arch-chroot" + fi + + if [[ "${I_AM_A_RACECAR}" == "y" ]]; + then + RACECAR_CHK='nice -n "-19" ' + else + RACECAR_CHK="" + fi + + if [[ -n $(find ${BASEDIR}/extra/pre-build.d/ -type f -newer ${BASEDIR}/root.x86_64/boot/vmlinuz-linux-${PNAME}) ]]; + then + touch ${LOCKFILE} + sleep 2 + find ${BASEDIR}/extra/pre-build.d/ -exec touch '{}' \; + rsync -a ${BASEDIR}/extra/pre-build.d/64/. ${BASEDIR}/root.x86_64/. + rsync -a ${BASEDIR}/extra/pre-build.d/32/. ${BASEDIR}/root.i686/. + find ${BASEDIR}/root.x86_64/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \; + find ${BASEDIR}/root.i686/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \; + fi + + for i in ${CHROOTDIR32} ${CHROOTDIR64}; + do + echo -n "...Packages installing/upgrading to ${i}..." + local INSTKERN=$(file ${i}/boot/vmlinuz-linux-${PNAME} | awk '{print $9}' | cut -f1 -d"-") + local MIRROR=$(egrep '^Server' ${i}/etc/pacman.d/mirrorlist | head -n1 | sed -e 's/^Server\ =\ //g ; s#$repo.*#core/os/x86_64/#g') + local NEWKERN=$(curl -s "${MIRROR}" | grep linux | awk '{print $3}' | cut -f2 -d\" | egrep '^linux-[0-9].*pkg.tar.xz$' | cut -f2 -d"-") + + if [[ -n $(find ${BASEDIR}/extra/pre-build.d/ -type f -newer ${BASEDIR}/root.x86_64/boot/vmlinuz-linux-${PNAME}) ]] || [[ "${INSTKERN}" != "${NEWKERN}" ]]; + then + ${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}yaourt -Syyua --noconfirm --devel" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + else + ${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}yaourt -Syyua --noconfirm --devel --ignore linux,linux-${PNAME}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done + ${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}yaourt -S --needed --ignore linux,linux-${PNAME} --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done + #${CHROOTCMD} ${i}/ bash -c "yaourt -S --needed --noconfirm ${PKGLIST}" + if [[ -n $(find ${BASEDIR}/extra/pre-build.d/ -type f -newer root.x86_64/boot/vmlinuz-linux-${PNAME}) ]]; + then + ${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}mkinitcpio -p linux-${PNAME}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + echo "Done." + done + + # we need to set -e for the following as they may fail. + # 32-bit + echo "Installing packages for 32-bit..." + PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.32 | tr '\n' ' ') + if [ -n "${PKGLIST}" ]; + then + ${CHROOTCMD} ${CHROOTDIR32}/ bash -c "yes '' | ${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + for x in $(find ${CHROOTDIR32}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done + + # 64-bit + echo "Installing packages for 64-bit..." + PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.64 | tr '\n' ' ') + if [ -n "${PKGLIST}" ]; + then + ${CHROOTCMD} ${CHROOTDIR64}/ bash -c "${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + for x in $(find ${CHROOTDIR64}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done + #${CHROOTCMD} ${CHROOTDIR64}/ bash -c "yaourt -S --needed --noconfirm ${PKGLIST}" + echo "Syncing overlay..." + rsync -a ${BASEDIR}/overlay/64/. ${CHROOTDIR64}/. + echo "Done." + + echo "Syncing overlay..." + touch ${LOCKFILE} + sleep 2 + find ${BASEDIR}/overlay -exec touch '{}' \; + rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/overlay/. ${CHROOTDIR64}/. + rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/overlay/. ${CHROOTDIR32}/. + rsync -a ${BASEDIR}/overlay/32/. ${CHROOTDIR32}/. + rsync -a ${BASEDIR}/overlay/64/. ${CHROOTDIR64}/. + find ${CHROOTDIR64}/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \; + find ${CHROOTDIR32}/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \; + chown -R 1000:1000 ${CHROOTDIR32}/home/${REGUSR} + chown -R 1000:1000 ${CHROOTDIR64}/home/${REGUSR} + find ${CHROOTDIR64}/home/${REGUSR}/ -type d -exec chmod 700 '{}' \; + find ${CHROOTDIR64}/home/${REGUSR}/ -type f -exec chmod 600 '{}' \; + find ${CHROOTDIR32}/home/${REGUSR}/ -type d -exec chmod 700 '{}' \; + find ${CHROOTDIR32}/home/${REGUSR}/ -type f -exec chmod 600 '{}' \; + chown -R 0:0 ${CHROOTDIR32}/root + chown -R 0:0 ${CHROOTDIR64}/root + find ${CHROOTDIR64}/root/ -type d -exec chmod 700 '{}' \; + find ${CHROOTDIR64}/root/ -type f -exec chmod 600 '{}' \; + find ${CHROOTDIR32}/root/ -type d -exec chmod 700 '{}' \; + find ${CHROOTDIR32}/root/ -type f -exec chmod 600 '{}' \; + echo "Done." + +} diff --git a/lib/mk.chroot.sh b/lib/mk.chroot.sh new file mode 100755 index 0000000..cea914a --- /dev/null +++ b/lib/mk.chroot.sh @@ -0,0 +1,275 @@ +#!/bin/bash + +function mkchroot { + + # just in case we don't inherit. + if [[ -z "${FUNCNAME}" ]]; + then + FUNCNAME='mkchroot-standalone' + fi + + ## Import settings + if [ -f "build.conf" ]; + then + echo "Now importing settings/variables." + set -e + source build.conf + set +e + else + echo "You have not configured a build.conf OR you are not running from the project's root directory (the git repository's working directory)." + echo "If you are indeed in the correct directory, you may copy the sample at ../extra/build.conf.sample," + echo "edit it for appropriate values, and copy to /build.conf" + echo 'This error is fatal. Dying.' + exit 1 + fi + + if [[ ${EUID} -ne 0 ]]; + then + #echo "This script must be run as root" 1>&2 + echo "This script must be run as root." + exit 1 + fi + + if [ -z "${BASEDIR}" ]; + then + echo 'You need to export the directory ("$BASEDIR") which will hold the chroots and the git project directory.' + echo "(don't worry, there's a .gitignore for the chroots)" + echo "e.g. export BASEDIR=\"/opt/dev/work/client-diag-disc/\"" + echo 'Dying.' + exit 1 + fi + + if [ ! -d "${BASEDIR}" ]; + then + echo "You need to make sure ${BASEDIR} is a valid, existing directory. This script does not automatically create it as a sanity measure." + echo 'Dying.' + exit 1 + fi + + if [[ "${EUID}" != "0" ]]; + then + echo "This script must be run as root." + echo 'Dying.' + exit 1 + fi + + if [ -f ${LOCKFILE} ]; + then + echo "Script already running, stale lockfile present, or an error occurred during last run." + echo "Please clear ${LOCKFILE} by hand before attempting another build." + echo -n "Timestamp of lockfile is: " + ls -l ${LOCKFILE} | awk '{print $6" "$7" "$8}' + exit 1 + else + touch ${LOCKFILE} + fi + + if [ -f "/usr/bin/systemd-nspawn" ]; + then + CHROOTCMD="systemd-nspawn -D" + else + CHROOTCMD="${CHROOTDIR64}/bin/arch-chroot" + fi + + if [[ "${I_AM_A_RACECAR}" == "y" ]]; + then + RACECAR_CHK='nice -n "-19" ' + else + RACECAR_CHK="" + fi + + cd "${BASEDIR}" + + ## Set some vars. + MIRROR='http://mirrors.kernel.org/archlinux' + RLSDIR="${MIRROR}/iso/latest" + + CURRLS64=$(curl -s ${RLSDIR}/sha1sums.txt | grep bootstrap | awk '{print $2}' | grep 'x86_64') + CKSUM64=$(curl -s ${RLSDIR}/sha1sums.txt | grep bootstrap | grep x86_64 | awk '{print $1}') + CURRLS32=$(curl -s ${RLSDIR}/sha1sums.txt | grep bootstrap | awk '{print $2}' | grep 'i686') + CKSUM32=$(curl -s ${RLSDIR}/sha1sums.txt | grep bootstrap | grep i686 | awk '{print $1}') + + ## Fetch latest tarball release + echo "Checking/fetching snapshots..." + if [ -f "latest.64.tar.gz" ]; + then + LOCSUM64=$(sha1sum latest.64.tar.gz | awk '{print $1}') + if [[ "${CKSUM64}" != "${LOCSUM64}" ]]; + then + echo "WARNING: CHECKSUMS DON'T MATCH." + echo "Local: ${LOCSUM64}" + echo "Remote: ${CKSUM64}" + echo "Fetching fresh copy." + curl -o latest.64.tar.gz "${RLSDIR}/${CURRLS64}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + else + curl -o latest.64.tar.gz "${RLSDIR}/${CURRLS64}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + + if [ -f "latest.32.tar.gz" ]; + then + LOCSUM32=$(sha1sum latest.32.tar.gz | awk '{print $1}') + if [[ "${CKSUM32}" != "${LOCSUM32}" ]]; + then + echo "WARNING: CHECKSUMS DON'T MATCH." + echo "Local: ${LOCSUM32}" + echo "Remote: ${CKSUM32}" + echo "Fetching fresh copy." + curl -o latest.32.tar.gz "${RLSDIR}/${CURRLS32}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + else + curl -o latest.32.tar.gz "${RLSDIR}/${CURRLS32}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + + if [ ! -f "${CHROOTDIR32}/etc/pacman.d/gnupg/trustdb.gpg" ] || [ ! -f "${CHROOTDIR64}/etc/pacman.d/gnupg/trustdb.gpg" ]; + then + # Now let's ${BASEDIR}/extract that shit + echo "Extracting snapshots. This will take a while..." + ## 64-bit + tar -xpzf latest.64.tar.gz + ## 32-bit + tar -xpzf latest.32.tar.gz + + # And configure the package manager + echo "Configuring snapshots..." + touch ${LOCKFILE} + sleep 2 + find ${BASEDIR}/extra/pre-build.d/ -exec touch '{}' \; + rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/extra/pre-build.d/. ${BASEDIR}/root.x86_64/. + rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/extra/pre-build.d/. ${BASEDIR}/root.i686/. + rsync -a ${BASEDIR}/extra/pre-build.d/64/. ${BASEDIR}/root.x86_64/. + rsync -a ${BASEDIR}/extra/pre-build.d/32/. ${BASEDIR}/root.i686/. + chmod -f 755 ${BASEDIR}/extra/pre-build.d/{32/,64/,}etc/customizepkg.d/* + find ${BASEDIR}/root.x86_64/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \; + find ${BASEDIR}/root.i686/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \; + for i in i686 x86_64; + do + cat > ${BASEDIR}/root.${i}/etc/os-release << EOF +NAME="Arch Linux" +ID=arch +PRETTY_NAME="Arch Linux" +ANSI_COLOR="0;36" +HOME_URL="https://www.archlinux.org/" +SUPPORT_URL="https://bbs.archlinux.org/" +BUG_REPORT_URL="https://bugs.archlinux.org/" +EOF + done + + # And make it usable. + echo "Initializing chroots..." + + for i in ${CHROOTDIR32} ${CHROOTDIR64}; + do + echo "Prepping ${i}. This will take a while..." + echo -n "...Key initializing..." + ${CHROOTCMD} ${i}/ ${RACECAR_CHK}pacman-key --init >> "${LOGFILE}.${FUNCNAME}" 2>&1 + echo "Done." + echo -n "...Importing keys..." + ${CHROOTCMD} ${i}/ ${RACECAR_CHK}pacman-key --populate archlinux >> "${LOGFILE}.${FUNCNAME}" 2>&1 + echo "Done." + echo -n "...Installing base packages..." + #${CHROOTCMD} ${i}/ pacstrap -dGcM base + # if that doesn't work, + + ${CHROOTCMD} ${i}/ pacman -Syy >> "${LOGFILE}.${FUNCNAME}" 2>&1 + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done + ${CHROOTCMD} ${i}/ pacman -S --noconfirm --needed base >> "${LOGFILE}.${FUNCNAME}" 2>&1 + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done + echo "Done." + echo -n "...Upgrading any outdated packages..." + ${CHROOTCMD} ${i}/ ${RACECAR_CHK}pacman -Syyu --noconfirm >> "${LOGFILE}.${FUNCNAME}" 2>&1 + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done + echo "Done. Finishing/cleaning up..." + ${CHROOTCMD} ${i}/ pacman -S --noconfirm --needed yaourt >> "${LOGFILE}.${FUNCNAME}" 2>&1 + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done + ${CHROOTCMD} ${i}/ pacman -S --noconfirm --needed base-devel >> "${LOGFILE}.${FUNCNAME}" 2>&1 + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done + done + ${CHROOTCMD} ${CHROOTDIR64}/ 'pacman --noconfirm -R gcc-libs libtool' >> "${LOGFILE}.${FUNCNAME}" 2>&1 + ${CHROOTCMD} ${CHROOTDIR64}/ 'pacman --noconfirm -S multilib-devel' >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + + # preprocessing + sed -i -e '/base-devel/d ; /multilib-devel/d' ${BASEDIR}/extra/packages.* + # both + echo "Installing common packages..." + PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.both | tr '\n' ' ') + for i in ${CHROOTDIR32} ${CHROOTDIR64}; + do + echo -n "...Packages installing to ${i}..." + ${CHROOTCMD} ${i}/ bash -c "yaourt -S --needed --noconfirm customizepkg-scripting" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done + echo -n "Compiling kernel sources..." + set +e + ${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}yaourt -S --needed --noconfirm linux" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + set -e + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done + echo -n "Regular packages..." + set +e + ${CHROOTCMD} ${i}/ bash -c "yes '' | ${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + set -e + for x in $(find ${i}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%%.pacorig} ; done + echo -n "...Creating ${REGUSR} user..." + ${CHROOTCMD} ${i}/ useradd -m -s /bin/bash -c "Default user" ${REGUSR} >> "${LOGFILE}.${FUNCNAME}" 2>&1 + ${CHROOTCMD} ${i}/ usermod -aG users,games,video,audio ${REGUSR} >> "${LOGFILE}.${FUNCNAME}" 2>&1 + ${CHROOTCMD} ${i}/ passwd -d ${REGUSR} >> "${LOGFILE}.${FUNCNAME}" 2>&1 + mkdir -p ${i}/etc/sudoers.d ; chmod 750 ${i}/etc/sudoers.d + echo "${REGUSR} ALL=(ALL) ALL" >> ${i}/etc/sudoers.d/${REGUSR} + echo "Done." + done + + for i in ${CHROOTDIR32} ${CHROOTDIR64}; + do + ${CHROOTCMD} ${i}/ bash -c "${RACECAR_CHK}mkinitcpio -p linux-${PNAME}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + done + + # 32-bit + echo "Installing packages for 32-bit..." + PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.32 | tr '\n' ' ') + if [ -n "${PKGLIST}" ]; + then + ${CHROOTCMD} ${CHROOTDIR32}/ bash -c "${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + for x in $(find ${CHROOTDIR32}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done + echo "Done." + + # 64-bit + echo "Installing packages for 64-bit..." + PKGLIST=$(sed -e '/^[[:space:]]*#/d ; /^[[:space:]]*$/d' ${BASEDIR}/extra/packages.64 | tr '\n' ' ') + if [ -n "${PKGLIST}" ]; + then + ${CHROOTCMD} ${CHROOTDIR64}/ bash -c "${RACECAR_CHK}yaourt -S --needed --noconfirm ${PKGLIST}" >> "${LOGFILE}.${FUNCNAME}" 2>&1 + fi + for x in $(find ${CHROOTDIR64}/etc/ -type f -iname "*.pacorig");do mv -f ${x} ${x%.pacorig} ; done + echo "Done." + + echo "Syncing overlay..." + touch ${LOCKFILE} + sleep 2 + find ${BASEDIR}/overlay -exec touch '{}' \; + rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/overlay/. ${CHROOTDIR64}/. + rsync -a --exclude '/32' --exclude '/64' ${BASEDIR}/overlay/. ${CHROOTDIR32}/. + rsync -a ${BASEDIR}/overlay/32/. ${CHROOTDIR32}/. + rsync -a ${BASEDIR}/overlay/64/. ${CHROOTDIR64}/. + find ${CHROOTDIR64}/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \; + find ${CHROOTDIR32}/ -newer ${LOCKFILE} -exec chown -R root:root '{}' \; + chown -R 1000:1000 ${CHROOTDIR32}/home/${REGUSR} + chown -R 1000:1000 ${CHROOTDIR64}/home/${REGUSR} + find ${CHROOTDIR64}/home/${REGUSR}/ -type d -exec chmod 700 '{}' \; + find ${CHROOTDIR64}/home/${REGUSR}/ -type f -exec chmod 600 '{}' \; + find ${CHROOTDIR32}/home/${REGUSR}/ -type d -exec chmod 700 '{}' \; + find ${CHROOTDIR32}/home/${REGUSR}/ -type f -exec chmod 600 '{}' \; + find ${CHROOTDIR64}/root/ -type d -exec chmod 700 '{}' \; + find ${CHROOTDIR64}/root/ -type f -exec chmod 600 '{}' \; + find ${CHROOTDIR32}/root/ -type d -exec chmod 700 '{}' \; + find ${CHROOTDIR32}/root/ -type f -exec chmod 600 '{}' \; + echo "Done." + + + rm -f ${LOCKFILE} + + echo "Chroot setup complete." + +} + +mkchroot diff --git a/overlay/32/.keepme b/overlay/32/.keepme new file mode 100644 index 0000000..e69de29 diff --git a/overlay/64/.keepme b/overlay/64/.keepme new file mode 100644 index 0000000..e69de29 diff --git a/overlay/etc/lxdm/lxdm.conf b/overlay/etc/lxdm/lxdm.conf new file mode 100644 index 0000000..0bf1b07 --- /dev/null +++ b/overlay/etc/lxdm/lxdm.conf @@ -0,0 +1,62 @@ +[base] +## uncomment and set autologin username to enable autologin +#autologin=bdisk + +## uncomment and set timeout to enable timeout autologin, +## the value should >=5 +# timeout=10 + +## default session or desktop used when no systemwide config +# session=/usr/bin/startlxde + +## uncomment and set to set numlock on your keyboard +# numlock=0 + +## set this if you don't want to put xauth file at ~/.Xauthority +# xauth_path=/tmp + +# not ask password for users who have empty password +# skip_password=1 + +## greeter used to welcome the user +greeter=/usr/lib/lxdm/lxdm-greeter-gtk + +[server] +## arg used to start xserver, not fully function +arg=/usr/bin/X -background vt1 +# uncomment this if you really want xserver listen to tcp +# tcp_listen=1 +# uncoment this if you want reset the xserver after logou +# reset=1 + +[display] +## gtk theme used by greeter +gtk_theme=Clearlooks + +## background of the greeter +# bg=/usr/share/backgrounds/default.png + +## if show bottom pane +bottom_pane=1 + +## if show language select control +lang=1 + +## if show keyboard layout select control +keyboard=0 + +## the theme of greeter +theme=Industrial + +[input] + +[userlist] +## if disable the user list control at greeter +disable=0 + +## whitelist user +white= + +## blacklist user +black= + diff --git a/overlay/etc/systemd/scripts/livecd.fix.sh b/overlay/etc/systemd/scripts/livecd.fix.sh new file mode 100755 index 0000000..6778424 --- /dev/null +++ b/overlay/etc/systemd/scripts/livecd.fix.sh @@ -0,0 +1,9 @@ +#/bin/sh - + +#chmod 4755 /opt/google/chrome-beta/chrome-sandbox +mkdir -p /var/db/sudo/lectured +touch /var/db/sudo/lectured/bdisk +chmod 700 /var/db/sudo/lectured +chgrp bdisk /var/db/sudo/lectured/bdisk +chmod 600 /var/db/sudo/lectured/bdisk +chmod 4755 /usr/bin/sudo diff --git a/overlay/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service b/overlay/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service new file mode 120000 index 0000000..e874a9b --- /dev/null +++ b/overlay/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/NetworkManager.service \ No newline at end of file diff --git a/overlay/etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service b/overlay/etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service new file mode 120000 index 0000000..a7e5cd4 --- /dev/null +++ b/overlay/etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/NetworkManager-dispatcher.service \ No newline at end of file diff --git a/overlay/etc/systemd/system/getty.target.wants/getty@tty1.service b/overlay/etc/systemd/system/getty.target.wants/getty@tty1.service new file mode 120000 index 0000000..7bfe080 --- /dev/null +++ b/overlay/etc/systemd/system/getty.target.wants/getty@tty1.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/getty@.service \ No newline at end of file diff --git a/overlay/etc/systemd/system/getty@tty1.service.d/autologin.conf b/overlay/etc/systemd/system/getty@tty1.service.d/autologin.conf new file mode 100644 index 0000000..5ca0405 --- /dev/null +++ b/overlay/etc/systemd/system/getty@tty1.service.d/autologin.conf @@ -0,0 +1,5 @@ +#[Service] +##Type=simple +#Type=idle +#ExecStart= +#ExecStart=-/usr/bin/agetty --autologin bdisk --noclear %I 38400 linux diff --git a/overlay/etc/systemd/system/livecdfix.service b/overlay/etc/systemd/system/livecdfix.service new file mode 100644 index 0000000..d316dd5 --- /dev/null +++ b/overlay/etc/systemd/system/livecdfix.service @@ -0,0 +1,11 @@ +[Unit] +Description=Various LiveCD fixes +After=pacmandb.service + +[Service] +Type=oneshot +ExecStart=/bin/bash /etc/systemd/scripts/livecd.fix.sh +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/overlay/etc/systemd/system/multi-user.target.wants/NetworkManager.service b/overlay/etc/systemd/system/multi-user.target.wants/NetworkManager.service new file mode 120000 index 0000000..e874a9b --- /dev/null +++ b/overlay/etc/systemd/system/multi-user.target.wants/NetworkManager.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/NetworkManager.service \ No newline at end of file diff --git a/overlay/etc/systemd/system/multi-user.target.wants/livecdfix.service b/overlay/etc/systemd/system/multi-user.target.wants/livecdfix.service new file mode 120000 index 0000000..60d5b4a --- /dev/null +++ b/overlay/etc/systemd/system/multi-user.target.wants/livecdfix.service @@ -0,0 +1 @@ +/etc/systemd/system/livecdfix.service \ No newline at end of file diff --git a/overlay/etc/systemd/system/multi-user.target.wants/pacmandb.service b/overlay/etc/systemd/system/multi-user.target.wants/pacmandb.service new file mode 120000 index 0000000..16e5cce --- /dev/null +++ b/overlay/etc/systemd/system/multi-user.target.wants/pacmandb.service @@ -0,0 +1 @@ +/etc/systemd/system/pacmandb.service \ No newline at end of file diff --git a/overlay/etc/systemd/system/multi-user.target.wants/sshd.service b/overlay/etc/systemd/system/multi-user.target.wants/sshd.service new file mode 120000 index 0000000..d21ebd9 --- /dev/null +++ b/overlay/etc/systemd/system/multi-user.target.wants/sshd.service @@ -0,0 +1 @@ +/usr/lib/systemd/system/sshd.service \ No newline at end of file diff --git a/overlay/etc/systemd/system/pacmandb.service b/overlay/etc/systemd/system/pacmandb.service new file mode 100644 index 0000000..870e6dd --- /dev/null +++ b/overlay/etc/systemd/system/pacmandb.service @@ -0,0 +1,10 @@ +[Unit] +Description=Restoring Installed Packages DB + +[Service] +Type=oneshot +ExecStart=/usr/bin/tar -Jxf /usr/local/pacman.db.tar.xz -C /var/lib/pacman/ +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target