8.5 KiB
How to Netboot BDisk
I update this server with images and iPXE images you can use to netboot my personal spin of BDisk.
You can download a demo of the iPXE functionality. Note that your computer needs to be connected to a valid Internet connection via ethernet and be able to get a DHCP lease for it to work.
|
Note
|
Advanced users, you can verify it against the GPG signature (ASC, BIN). Please see this blog post for information on fetching my keys and such. Note that while this project is in flux, I may be signing with temporarily-generated throwaway keys. |
Once downloaded, you can follow the appropriate steps based on your operating system:
Windows
CD/DVD
Simply put a blank CD/DVD-R (or RW, RW+, etc.) in your optical media drive. Find where you downloaded the above file (it should be named bdisk-mini.iso). Right-click and select Burn disc image.
USB
You’ll most likely want to download a program called USBWriter. Unzip it (or just open it via double-clicking) and copy the USBWriter.exe program somewhere you’ll remember- your desktop, for instance.
Next, make sure your USB thumbdrive is inserted in your computer and formatted/"initialized" already.
|
Warning
|
Formatting a disk/partition will destroy any and all data on that device! Make sure there is nothing on your USB drive you want to keep, as formatting BDisk to it will delete any data on it. |
Now right-click on the USBWriter icon and select Run as administrator. You may get a warning pop up asking for permissions for USBWriter. It’s safe to click Yes.
Select the proper USB flash drive from the Target device dropdown menu. If your USB drive isn’t showing up, try clicking the Refresh button and looking again. (If it still doesn’t show up, you may need to reboot your computer.)
Click the Browse… button and find where you saved bdisk-mini.iso. Once you’ve found it, double-click it. Then click Write. It might take a little bit of time depending on how fast your USB interface is, so give it some time. When it finishes, click Close. You now have a bootable USB thumbdrive.
Booting
Booting differs depending on each and every hardware, but typically you should get a message when you first start up for "Setup" and/or "Boot options" or the like. The terminology differs here. It will probably be an F# button (usually F2, F4, F10, or F12) or the Delete key. While rebooting, try to hold or press repeatedly this key and you should come across an option somewhere with a list of devices to boot from or an order you can set. Make sure the USB (or CD/DVD, whichever media type you’re using) is set as first, and save.
Mac OS X/macOS
CD/DVD
Unfortunately, the OS X/macOS Disk Utility doesn’t work with hybrid ISOs (what bdisk-mini.iso is). At all. You’re out of luck, I’m afraid, unless you happen have a spare USB thumbdrive handy.
USB
We’ll need to get a little messy with this one.
Open Applications ⇒ Utilities ⇒ Terminal. A black box should pop up.
Insert your USB thumbdrive now (if you haven’t already) and run the following command:
diskutil list
You should see an entry, probably near the bottom, that looks something like this:
(...) /dev/disk42 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: *8.2 GB disk42 (...)
|
Caution
|
Be sure to find the disk that matches the size of your thumbdrive! If you use the wrong disk identifier, it will break your OS X/macOS install at best and delete all your data at worst! |
Now that you’ve found which disk your USB device is (the /dev/disk# part), we can continue. Make sure that it is the disk ID right above the line that contains your flash drive size! For our example, I will use /dev/disk42 as an example as it’s highly unlikely you’ll have that many disk IDs, but be sure to replace this in the following commands with the proper disk ID you found above.
Then we need to unmount the disk, in case it’s already mounted.
diskutil unmountDisk /dev/disk42
Assuming you saved BDisk Mini to your Desktop, you can do:
sudo dd if=~/Desktop/bdisk-mini.iso of=/dev/disk42
|
Note
|
The above command may prompt you for a password. This is the same password you use to log into your Mac (and unlock the screensaver, etc.). No characters will show up when you type (for security reasons, in case someone is behind you watching your screen) so it may take you a couple tries. |
This will run for a couple seconds. When it finishes, you should see something similar to (but not necessarily the same numbers as) this:
0+1 records in 0+1 records out 169 bytes transferred in 0.000530 secs (318865 bytes/sec)
At this point you may get a popup warning you "The disk you inserted was not readable by this computer." If you do, just click the Ignore button.
One last step. Still in Terminal:
diskutil eject /dev/disk42
You can then close Terminal.
Booting
The instructions here don’t differ too much than from Windows, though it’s always the same key. From it being in a shutdown state, power on your Macbook Pro (or whatever it is you have) and hold the Option key (or the Alt key on non-Apple keyboards). The Option/Alt key should bring up a boot menu that will let you select a USB device to boot from.
Strangely enough, you should still be able to boot a BDisk Mini CD/DVD, you just can’t burn one. I’m tempted to make a cheap dig at Apple, but I’ll refrain.
GNU/Linux
CD/DVD
USB
Very similar to OS X/macOS in approach. First open a terminal emulator- the ways of navigating to it depends on your window manager/desktop environment, but it’s usually under a System or Utilities menu.
Now we need to find which disk our USB thumbdrive is. Insert your USB thumbdrive now, if you haven’t already, and run in the terminal:
sudo fdisk -l
You should see a device matching your USB thumbdrive’s size. In our example, I use /dev/sdz as it’s unlikely you have that many disks attached to a system, but be sure to replace this in the following commands with the proper disk ID you find.
(...) Disk /dev/sdz: 7.6 GiB, 8178892800 bytes, 15974400 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes (...)
|
Caution
|
Be sure to find the disk that matches the size of your thumbdrive! If you use the wrong disk identifier, it will break your GNU/Linux install (or possibly Windows install if you’re dual-booting, etc.) at best and delete all your data at worst! |
Make sure it isn’t mounted:
umount /dev/sdz
You should get a message that says umount: /dev/sdz: not mounted. If it was mounted before, it’s unmounted now.
Next, simply dd over the ISO file.
sudo dd if=~/Desktop/bdisk-mini.iso of=/dev/sdz
|
Note
|
The above command may prompt you for a password. This is the same password you use to log in (and unlock the screensaver, etc.). No characters will show up when you type (for security reasons, in case someone is behind you watching your screen) so it may take you a couple tries. |
This will run for a couple seconds. When it finishes, you should see something similar to (but not necessarily the same numbers as) this:
75776+0 records in 75776+0 records out 38797312 bytes (39 MB, 37 MiB) copied, 9.01915 s, 4.3 MB/s
If you get a popup from your desktop environment (assuming you’re using one) about not being able to mount a disk, or that it’s unformatted, etc. and it prompts you to format, ignore/cancel/close it- do not format it! This would erase the BDisk Mini image on it.
Booting
Exactly the same as those for Windows. (Unless you’re running GNU/Linux on Mac hardware, in which case follow the booting instructions for Mac instead.)