6.5 KiB
kant(1) Manual Page
NAME
KANT - Sign GnuPG/OpenPGP/PGP keys and notify the key owner(s)
SYNOPSIS
kant [OPTION] -k/--key <KEY_IDS|BATCHFILE>
OPTIONS
Keysigning (and keysigning parties) can be a lot of fun, and can offer someone with new keys a way into the WoT (Web-of-Trust). Unfortunately, they can be intimidating to those new to the experience. This tool offers a simple and easy-to-use interface to sign public keys (normal, local-only, and/or non-exportable), set owner trust, specify level of checking done, and push the signatures to a keyserver. It even supports batch operation via a CSV file.
- -h, --help
-
Display brief help/usage and exit.
- -k KEY_IDS|BATCHFILE, --key KEY_IDS|BATCHFILE
-
A single or comma-separated list of key IDs (see KEY ID FORMAT) to sign, trust, and notify. Can also be an email address. If -b/--batch is specified, this should instead be a path to the batch file (see BATCHFILE/Format).
- -K KEY_ID, --sigkey KEY_ID
-
The key to use when signing other keys (see KEY ID FORMAT). The default key is automatically determined at runtime (it will be displayed in -h/--help output).
- -t TRUSTLEVEL, --trust TRUSTLEVEL
-
The trust level to automatically apply to all keys (if not specified, KANT will prompt for each key). See BATCHFILE/TRUSTLEVEL for trust level notations.
- -c CHECKLEVEL, --check CHECKLEVEL
-
The level of checking that was done to confirm the validity of ownership for all keys being signed. If not specified, the default is for KANT to prompt for each key we sign. See BATCHFILE/CHECKLEVEL for check level notations.
- -l LOCAL, --local LOCAL
-
If specified, make the signature(s) local-only (i.e. non-exportable, don’t push to a keyserver). See BATCHFILE/LOCAL for more information on local signatures.
- -n, --no-notify
-
This requires some explanation. If you have MSMTP[1] installed and configured for the currently active user, then we will send out emails to recipients letting them know we have signed their key. However, if MSMTP is installed and configured but this flag is given, then we will NOT attempt to send emails.
- -s KEYSERVER(S), --keyservers KEYSERVER(S)
-
The comma-separated keyserver(s) to push to. The default keyserver list is automatically generated at runtime.
- -b, --batch
-
If specified, operate in batch mode. See BATCHFILE for more information.
- -D GPGDIR, --gpgdir GPGDIR
-
The GnuPG configuration directory to use (containing your keys, etc.). The default is automatically generated at runtime, but will probably be /home/<yourusername>/.gnupg or similar.
- -T, --testkeyservers
-
If specified, initiate a basic test connection with each set keyserver before anything else. Disabled by default.
KEY ID FORMAT
Key IDs can be specified in one of two ways. The first (and preferred) way is to use the full 160-bit (40-character, hexadecimal) key ID. A little known fact is the fingerprint of a key:
DEAD BEEF DEAD BEEF DEAD BEEF DEAD BEEF DEAD BEEF
is actually the full key ID of the primary key; i.e.:
DEADBEEFDEADBEEFDEADBEEFDEADBEEFDEADBEEF
The second way to specify a key, as far as KANT is concerned, is to use an email address. Do note that if more than one key is found that matches the email address given (and they usually are), you will be prompted to select the specific correct key ID anyways so it’s usually a better idea to have the owner present their full key ID/fingerprint right from the get-go.
BATCHFILE
Format
The batch file is a CSV-formatted (comma-delimited) file containing keys to sign and other information about them. It keeps the following format:
KEY_ID,TRUSTLEVEL,LOCAL,CHECKLEVEL,NOTIFY
For more information on each column, reference the appropriate sub-section below.
KEY_ID
See KEY ID FORMAT.
TRUSTLEVEL
The TRUSTLEVEL is specified by the following levels (you can use either the numeric or string representation):
-1 = Never 0 = Unknown 1 = Untrusted 2 = Marginal 3 = Full 4 = Ultimate
It is how much trust to assign to a key, and the signatures that key makes on other keys.[2]
LOCAL
Whether or not to push to a keyserver. It can be either the numeric or string representation of the following:
0 = False 1 = True
If 1/True, KANT will sign the key with a local signature (and the signature will not be pushed to a keyserver or be exportable).[3]
CHECKLEVEL
The amount of checking that has been done to confirm that the owner of the key is who they say they are and that the key matches their provided information. It can be either the numeric or string representation of the following:
0 = Unknown 1 = None 2 = Casual 3 = Careful
It is up to you to determine the classification of the amount of checking you have done, but the following is recommended (it is the policy the author follows):
Unknown: The key is unknown and has not been reviewed
None: The key has been signed, but no confirmation of the
ownership of the key has been performed (typically
a local signature)
Casual: The key has been presented and the owner is either
known to the signer or they have provided some form
of non-government-issued identification or other
proof (website, Keybase.io, etc.)
Careful: The same as Casual requirements but they have
provided a government-issued ID and all information
matches
It’s important to check each key you sign carefully. Failure to do so may hurt others' trust in your key.[4]
SEE ALSO
gpg(1), gpgconf(1)
RESOURCES
Author’s web site: https://square-r00t.net/ Author’s GPG information: https://square-r00t.net/gpg-info
COPYING
Copyright (C) 2017 Brent Saner.
Free use of this software is granted under the terms of the GPLv3 License.